[ndnSIM] Problem in installing ndnSIM 2.1 / 2.2

John Baugh jpbaugh at umich.edu
Wed Sep 20 15:10:43 PDT 2017 

Try copying / reinstalling CryptoPP to use/local/lib

On Sep 20, 2017 6:06 PM, "Carl Zu" <carlzu8 at gmail.com> wrote:

> Hi John,
>
> In usr/lib. And please find attached config.log if it is needed.
>
> Regards,
> C
>
> On Wed, Sep 20, 2017 at 11:41 PM, John Baugh <jpbaugh at umich.edu> wrote:
>
>> Where do you have CryptoPP installed?  What directory?
>>
>> On Sep 20, 2017 5:39 PM, "Carl Zu" <carlzu8 at gmail.com> wrote:
>>
>>> Dear Spyridon,
>>>
>>> Could you please give me some more hints?
>>>
>>> Thanks,
>>> C
>>>
>>> On Wed, Sep 20, 2017 at 9:07 PM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>
>>>> Hi Spyridon,
>>>>
>>>> Thanks for the link. I read it carefully. However, I still have a
>>>> couple of questions below:
>>>>
>>>> 1. is the cryptoPP version(s) associated with ndnSIM's 2.1, 2.2, and
>>>> 2.3 different ?. If this is the case, one cannot have different versions of
>>>> ndnSIM installed on a single machine. Right?
>>>>
>>>> 2. I could not find any information regarding the appropriate versions
>>>> of cryptoPP for each of 2.1, 2.2, and 2.3 releases.
>>>>
>>>> Thank you for your guidance in advance.
>>>>
>>>> -C
>>>>
>>>> On Wed, Sep 20, 2017 at 8:51 PM, Spyridon (Spyros) Mastorakis <
>>>> mastorakis at cs.ucla.edu> wrote:
>>>>
>>>>> Probably you are using a different version of CryptoPP that the one
>>>>> expected.
>>>>>
>>>>> Please take a look here:
>>>>>
>>>>> https://github.com/named-data-ndnSIM/ndnSIM/issues/81#issuec
>>>>> omment-328081673
>>>>>
>>>>> Spyridon (Spyros) Mastorakis
>>>>> Personal Website: http://cs.ucla.edu/~mastorakis/
>>>>> Internet Research Laboratory
>>>>> Computer Science Department
>>>>> UCLA
>>>>>
>>>>> On Sep 20, 2017, at 11:49 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>>
>>>>> Thank you Spyridon.
>>>>>
>>>>> Yes, just figured out that for ndnSIM 2.1, I need to download version
>>>>> 0.3.4 for NFD and ndn-cxx. Now, it configures, but it says:
>>>>>
>>>>> CryptoPP is present, but is not usable
>>>>> (complete log in /home/carl/ndnSIM-2.1/ns-3/build/config.log)
>>>>>
>>>>> I have installed all the prerequisites completely. What could be wrong
>>>>> here.
>>>>>
>>>>> Thanks,
>>>>> C
>>>>>
>>>>>
>>>>>
>>>>> On Wed, Sep 20, 2017 at 8:43 PM, Spyridon (Spyros) Mastorakis <
>>>>> mastorakis at cs.ucla.edu> wrote:
>>>>>
>>>>>> Take a look at the release notes of each version. The NFD and ndn-cxx
>>>>>> versions are mentioned there.
>>>>>>
>>>>>> Then, follow those links and clone the branches with the appropriate
>>>>>> version:
>>>>>>
>>>>>> https://github.com/named-data-ndnSIM/ndn-cxx
>>>>>> https://github.com/named-data-ndnSIM/NFD
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Spyridon (Spyros) Mastorakis
>>>>>> Personal Website: http://cs.ucla.edu/~mastorakis/
>>>>>> Internet Research Laboratory
>>>>>> Computer Science Department
>>>>>> UCLA
>>>>>>
>>>>>> On Sep 20, 2017, at 11:39 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>>>
>>>>>> Hi Spyridon,
>>>>>>
>>>>>> Correct.
>>>>>>
>>>>>> Which NFD and ndn-cxx versions are associated with 2.1 and 2.2 ?
>>>>>> Could you please give me instructions how can I do this with clone and with
>>>>>> recursive flag ?
>>>>>>
>>>>>> Thanks,
>>>>>> C
>>>>>>
>>>>>> On Wed, Sep 20, 2017 at 8:37 PM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>>>
>>>>>>> Hi Spyridon,
>>>>>>>
>>>>>>> Correct.
>>>>>>>
>>>>>>> Which NFD and ndn-cxx versions are associated with 2.1 and 2.2 ?
>>>>>>>
>>>>>>> Thanks,
>>>>>>> C
>>>>>>>
>>>>>>> On Wed, Sep 20, 2017 at 8:34 PM, Spyridon (Spyros) Mastorakis <
>>>>>>> mastorakis at cs.ucla.edu> wrote:
>>>>>>>
>>>>>>>> NFD and ndn-cxx are linked as github submodules with the simulator.
>>>>>>>>
>>>>>>>> Unless you use git clone with the —recursive flag on, you will
>>>>>>>> download the ndnSIM source code that contains 2 empty directories named NFD
>>>>>>>> and ndn-cxx.
>>>>>>>>
>>>>>>>> Spyridon (Spyros) Mastorakis
>>>>>>>> Personal Website: http://cs.ucla.edu/~mastorakis/
>>>>>>>> Internet Research Laboratory
>>>>>>>> Computer Science Department
>>>>>>>> UCLA
>>>>>>>>
>>>>>>>> On Sep 20, 2017, at 11:31 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>>>>>
>>>>>>>> Hi all,
>>>>>>>>
>>>>>>>> @John: I am on ubuntu 14.04.
>>>>>>>>
>>>>>>>> @Spyridon: When I use the following link to download 2.1, how
>>>>>>>> could I download the wrong NFD and ndn-cxx versions associated
>>>>>>>> with this simulator ?
>>>>>>>>
>>>>>>>> https://github.com/named-data-ndnSIM/ndnSIM/releases/tag/ndnSIM-2.1
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> C
>>>>>>>>
>>>>>>>> On Wed, Sep 20, 2017 at 8:26 PM, Spyridon (Spyros) Mastorakis <
>>>>>>>> mastorakis at cs.ucla.edu> wrote:
>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> are you sure you download the appropriate NFD and ndn-cxx versions
>>>>>>>>> associated with the simulator too?
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>>
>>>>>>>>> Spyridon (Spyros) Mastorakis
>>>>>>>>> Personal Website: http://cs.ucla.edu/~mastorakis/
>>>>>>>>> Internet Research Laboratory
>>>>>>>>> Computer Science Department
>>>>>>>>> UCLA
>>>>>>>>>
>>>>>>>>> On Sep 20, 2017, at 11:18 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>> Hi everyone,
>>>>>>>>>
>>>>>>>>> I need to install ndnSIM 2.1.I downloaded ndnSIM 2.1 from here:
>>>>>>>>>
>>>>>>>>> https://github.com/named-data-ndnSIM/ndnSIM/releases/tag/ndn
>>>>>>>>> SIM-2.1
>>>>>>>>>
>>>>>>>>> As for "ns-3" and "pybindgen", first, I did the following:
>>>>>>>>>
>>>>>>>>> git clone https://github.com/named-data-ndnSIM/ns-3-dev.git ns-3
>>>>>>>>> git clone https://github.com/named-data-ndnSIM/pybindgen.git pybindgen
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> After, I tried also downloading older versions of "pybindgen" as well as "ns-3". But in any case, when I write "./waf configure --enable-examples", I have the following error:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Traceback (most recent call last):
>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Scripting.py", line 108, in waf_entry_point
>>>>>>>>>     run_commands()
>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Scripting.py", line 165, in run_commands
>>>>>>>>>     parse_options()
>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Scripting.py", line 138, in parse_options
>>>>>>>>>     Context.create_context('options').execute()
>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Options.py", line 146, in execute
>>>>>>>>>     super(OptionsContext,self).execute()
>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 92, in execute
>>>>>>>>>     self.recurse([os.path.dirname(g_module.root_path)])
>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 133, in recurse
>>>>>>>>>     user_function(self)
>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/wscript", line 213, in options
>>>>>>>>>     opt.recurse('src')
>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 133, in recurse
>>>>>>>>>     user_function(self)
>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/src/wscript", line 48, in options
>>>>>>>>>     opt.recurse(module, mandatory=False)
>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 133, in recurse
>>>>>>>>>     user_function(self)
>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/src/ndnSIM/wscript", line 16, in options
>>>>>>>>>     opt.load(['version'], tooldir=['%s/.waf-tools' % opt.path.abspath()])
>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 86, in load
>>>>>>>>>     module=load_tool(t,path)
>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 342, in load_tool
>>>>>>>>>     __import__(tool)
>>>>>>>>> ImportError: No module named version
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> I have the same problem for installing ndnSIM 2.2 as well. That is, I can only install the latest version. Does anybody have a successful experience on installing 2.1 or 2.2 ? I highly appreciate any guidance.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>>
>>>>>>>>> C
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>> _______________________________________________
>>> ndnSIM mailing list
>>> ndnSIM at lists.cs.ucla.edu
>>> http://www.lists.cs.ucla.edu/mailman/listinfo/ndnsim
>>>
>>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.lists.cs.ucla.edu/pipermail/ndnsim/attachments/20170920/047831a8/attachment-0001.html>

More information about the ndnSIM mailing list