[ndnSIM] Problem in installing ndnSIM 2.1 / 2.2

John Baugh jpbaugh at umich.edu
Wed Sep 20 14:41:00 PDT 2017


Where do you have CryptoPP installed?  What directory?

On Sep 20, 2017 5:39 PM, "Carl Zu" <carlzu8 at gmail.com> wrote:

> Dear Spyridon,
>
> Could you please give me some more hints?
>
> Thanks,
> C
>
> On Wed, Sep 20, 2017 at 9:07 PM, Carl Zu <carlzu8 at gmail.com> wrote:
>
>> Hi Spyridon,
>>
>> Thanks for the link. I read it carefully. However, I still have a couple
>> of questions below:
>>
>> 1. is the cryptoPP version(s) associated with ndnSIM's 2.1, 2.2, and 2.3
>> different ?. If this is the case, one cannot have different versions of
>> ndnSIM installed on a single machine. Right?
>>
>> 2. I could not find any information regarding the appropriate versions of
>> cryptoPP for each of 2.1, 2.2, and 2.3 releases.
>>
>> Thank you for your guidance in advance.
>>
>> -C
>>
>> On Wed, Sep 20, 2017 at 8:51 PM, Spyridon (Spyros) Mastorakis <
>> mastorakis at cs.ucla.edu> wrote:
>>
>>> Probably you are using a different version of CryptoPP that the one
>>> expected.
>>>
>>> Please take a look here:
>>>
>>> https://github.com/named-data-ndnSIM/ndnSIM/issues/81#issuec
>>> omment-328081673
>>>
>>> Spyridon (Spyros) Mastorakis
>>> Personal Website: http://cs.ucla.edu/~mastorakis/
>>> Internet Research Laboratory
>>> Computer Science Department
>>> UCLA
>>>
>>> On Sep 20, 2017, at 11:49 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>
>>> Thank you Spyridon.
>>>
>>> Yes, just figured out that for ndnSIM 2.1, I need to download version
>>> 0.3.4 for NFD and ndn-cxx. Now, it configures, but it says:
>>>
>>> CryptoPP is present, but is not usable
>>> (complete log in /home/carl/ndnSIM-2.1/ns-3/build/config.log)
>>>
>>> I have installed all the prerequisites completely. What could be wrong
>>> here.
>>>
>>> Thanks,
>>> C
>>>
>>>
>>>
>>> On Wed, Sep 20, 2017 at 8:43 PM, Spyridon (Spyros) Mastorakis <
>>> mastorakis at cs.ucla.edu> wrote:
>>>
>>>> Take a look at the release notes of each version. The NFD and ndn-cxx
>>>> versions are mentioned there.
>>>>
>>>> Then, follow those links and clone the branches with the appropriate
>>>> version:
>>>>
>>>> https://github.com/named-data-ndnSIM/ndn-cxx
>>>> https://github.com/named-data-ndnSIM/NFD
>>>>
>>>> Thanks,
>>>>
>>>> Spyridon (Spyros) Mastorakis
>>>> Personal Website: http://cs.ucla.edu/~mastorakis/
>>>> Internet Research Laboratory
>>>> Computer Science Department
>>>> UCLA
>>>>
>>>> On Sep 20, 2017, at 11:39 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>
>>>> Hi Spyridon,
>>>>
>>>> Correct.
>>>>
>>>> Which NFD and ndn-cxx versions are associated with 2.1 and 2.2 ? Could
>>>> you please give me instructions how can I do this with clone and with
>>>> recursive flag ?
>>>>
>>>> Thanks,
>>>> C
>>>>
>>>> On Wed, Sep 20, 2017 at 8:37 PM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>
>>>>> Hi Spyridon,
>>>>>
>>>>> Correct.
>>>>>
>>>>> Which NFD and ndn-cxx versions are associated with 2.1 and 2.2 ?
>>>>>
>>>>> Thanks,
>>>>> C
>>>>>
>>>>> On Wed, Sep 20, 2017 at 8:34 PM, Spyridon (Spyros) Mastorakis <
>>>>> mastorakis at cs.ucla.edu> wrote:
>>>>>
>>>>>> NFD and ndn-cxx are linked as github submodules with the simulator.
>>>>>>
>>>>>> Unless you use git clone with the —recursive flag on, you will
>>>>>> download the ndnSIM source code that contains 2 empty directories named NFD
>>>>>> and ndn-cxx.
>>>>>>
>>>>>> Spyridon (Spyros) Mastorakis
>>>>>> Personal Website: http://cs.ucla.edu/~mastorakis/
>>>>>> Internet Research Laboratory
>>>>>> Computer Science Department
>>>>>> UCLA
>>>>>>
>>>>>> On Sep 20, 2017, at 11:31 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>>>
>>>>>> Hi all,
>>>>>>
>>>>>> @John: I am on ubuntu 14.04.
>>>>>>
>>>>>> @Spyridon: When I use the following link to download 2.1, how could
>>>>>> I download the wrong NFD and ndn-cxx versions associated with this
>>>>>> simulator ?
>>>>>>
>>>>>> https://github.com/named-data-ndnSIM/ndnSIM/releases/tag/ndnSIM-2.1
>>>>>>
>>>>>> Thanks,
>>>>>> C
>>>>>>
>>>>>> On Wed, Sep 20, 2017 at 8:26 PM, Spyridon (Spyros) Mastorakis <
>>>>>> mastorakis at cs.ucla.edu> wrote:
>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> are you sure you download the appropriate NFD and ndn-cxx versions
>>>>>>> associated with the simulator too?
>>>>>>>
>>>>>>> Thanks,
>>>>>>>
>>>>>>> Spyridon (Spyros) Mastorakis
>>>>>>> Personal Website: http://cs.ucla.edu/~mastorakis/
>>>>>>> Internet Research Laboratory
>>>>>>> Computer Science Department
>>>>>>> UCLA
>>>>>>>
>>>>>>> On Sep 20, 2017, at 11:18 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>>>>
>>>>>>> Hi everyone,
>>>>>>>
>>>>>>> I need to install ndnSIM 2.1.I downloaded ndnSIM 2.1 from here:
>>>>>>>
>>>>>>> https://github.com/named-data-ndnSIM/ndnSIM/releases/tag/ndnSIM-2.1
>>>>>>>
>>>>>>> As for "ns-3" and "pybindgen", first, I did the following:
>>>>>>>
>>>>>>> git clone https://github.com/named-data-ndnSIM/ns-3-dev.git ns-3
>>>>>>> git clone https://github.com/named-data-ndnSIM/pybindgen.git pybindgen
>>>>>>>
>>>>>>>
>>>>>>> After, I tried also downloading older versions of "pybindgen" as well as "ns-3". But in any case, when I write "./waf configure --enable-examples", I have the following error:
>>>>>>>
>>>>>>>
>>>>>>> Traceback (most recent call last):
>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Scripting.py", line 108, in waf_entry_point
>>>>>>>     run_commands()
>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Scripting.py", line 165, in run_commands
>>>>>>>     parse_options()
>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Scripting.py", line 138, in parse_options
>>>>>>>     Context.create_context('options').execute()
>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Options.py", line 146, in execute
>>>>>>>     super(OptionsContext,self).execute()
>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 92, in execute
>>>>>>>     self.recurse([os.path.dirname(g_module.root_path)])
>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 133, in recurse
>>>>>>>     user_function(self)
>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/wscript", line 213, in options
>>>>>>>     opt.recurse('src')
>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 133, in recurse
>>>>>>>     user_function(self)
>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/src/wscript", line 48, in options
>>>>>>>     opt.recurse(module, mandatory=False)
>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 133, in recurse
>>>>>>>     user_function(self)
>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/src/ndnSIM/wscript", line 16, in options
>>>>>>>     opt.load(['version'], tooldir=['%s/.waf-tools' % opt.path.abspath()])
>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 86, in load
>>>>>>>     module=load_tool(t,path)
>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 342, in load_tool
>>>>>>>     __import__(tool)
>>>>>>> ImportError: No module named version
>>>>>>>
>>>>>>>
>>>>>>> I have the same problem for installing ndnSIM 2.2 as well. That is, I can only install the latest version. Does anybody have a successful experience on installing 2.1 or 2.2 ? I highly appreciate any guidance.
>>>>>>>
>>>>>>>
>>>>>>> Thanks,
>>>>>>>
>>>>>>> C
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>
> _______________________________________________
> ndnSIM mailing list
> ndnSIM at lists.cs.ucla.edu
> http://www.lists.cs.ucla.edu/mailman/listinfo/ndnsim
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.lists.cs.ucla.edu/pipermail/ndnsim/attachments/20170920/253ef08b/attachment.html>


More information about the ndnSIM mailing list