[Nfd-dev] [EXT] NFD Profiling tool

[Davide Pesavento]

I believe Ahmed said they're running NDN over Ethernet in the first email.

Btw... Ahmed, you can quickly check if the Ethernet face
implementation is a bottleneck in your scenario by re-running the same
tests over UDP and comparing the results.

Best regards,
Davide

On Mon, Dec 27, 2021 at 1:49 PM Junxiao Shi
<shijunxiao at email.arizona.edu> wrote:
>
> Hi Davide
>
> I used local Unix sockets only.
> OP never mentioned anything regarding Ethernet or UDP, so I assume it's local too.
>
> Yours, Junxiao
>
> On Mon, Dec 27, 2021 at 1:39 PM Davide Pesavento <davidepesa at gmail.com> wrote:
>>
>> External Email
>>
>> On Mon, Dec 27, 2021 at 12:42 PM Junxiao Shi
>> <shijunxiao at email.arizona.edu> wrote:
>> >
>> > Below results were from a recent NFD-nightly build, tested with the following commands:
>> > dd if=/dev/urandom bs=1MiB count=100 | ndnputchunks /A
>> > ndncatchunks /A >/dev/null
>> > Each test was executed only once, but you can see the order of magnitude.
>>
>> Did you run these tests over Ethernet, or UDP, or something else?
>>
>> Thanks,
>> Davide