[Nfd-dev] ndnping timeout at high frequency

Davide Pesavento davidepesa at gmail.com
Mon Jun 10 13:08:39 PDT 2019


Assuming you're using a UDP or Ethernet face between the two nodes, the
reason is packet loss due to congestion... NFD can't keep up, socket
buffers become full, and the operating system starts dropping packets.

Davide


On Mon, Jun 10, 2019, 3:42 PM Ishita Dasgupta via Nfd-dev <
nfd-dev at lists.cs.ucla.edu> wrote:

> Hi,
>
> I have two nodes linked with 6 Mbps physical interface. On the producer, I
> have ndnpingserver running and on the consumer, I run ndnping tests with
> frequency of 1 ms, 2ms and so on upto 1000ms. I see no issues when I run an
> ndnping of frequency 3ms or more, however in cases of 2ms frequency or
> mostly in the case of 1ms, I see upto 25% packet loss due to timeout
> occuring after a certain number of packet pings. I have monitored that the
> ndn interests reaches the consumer but the producer doesn't hear back the
> data packet.
> Initially, bandwidth was a concern, but I see that that ndnping data and
> interest packets are cumulatively 1386 bits. Thus, with 1ms frequency, 1.5
> Mbps should be enough (?)
> Has anybody else come across this? And knows why the timeout occurs at
> high frequencies?
>
> Regards,
> Ishita Dasgupta
>
> _______________________________________________
> Nfd-dev mailing list
> Nfd-dev at lists.cs.ucla.edu
> http://www.lists.cs.ucla.edu/mailman/listinfo/nfd-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.lists.cs.ucla.edu/pipermail/nfd-dev/attachments/20190610/ea0905c4/attachment.html>


More information about the Nfd-dev mailing list