[ndnSIM] Obtaining the number of Interest packets

Zakaria SABIR zakaria.sabir at uit.ac.ma
Mon Oct 11 03:41:32 PDT 2021


Well, in fact, when I check the log file I find only the responses to the
Interests. Here is a part of the output:

0.000123315s 9 ndn.Producer:OnInterest(0x219ab80, 0x21e9d70)
0.000123315s 9 ndn.Producer:OnInterest(): [INFO ] node(9) responding with
Data: /Interest2/%FE%08
0.000362154s 1 ndn.Producer:OnInterest(0x219a0c0, 0x2202090)
0.000362154s 1 ndn.Producer:OnInterest(): [INFO ] node(1) responding with
Data: /Interest1/%FE%01
0.000848164s 4 ndn.Consumer:OnData(0x21965c0, 0x21ab300)
0.000848164s 4 ndn.Consumer:OnData(): [INFO ] < DATA for 1
0.000848164s 4 ndn.Consumer:OnData(): [DEBUG] Hop count: 1
0.00106284s 2 ndn.Producer:OnInterest(0x219a420, 0x21f5e60)
0.00106284s 2 ndn.Producer:OnInterest(): [INFO ] node(2) responding with
Data: /Interest1/%FE%1B
0.00154916s 0 ndn.Consumer:OnData(0x2193650, 0x21ab300)
0.00154916s 0 ndn.Consumer:OnData(): [INFO ] < DATA for 27
0.00154916s 0 ndn.Consumer:OnData(): [DEBUG] Hop count: 1
0.100044s 1 ndn.Producer:OnInterest(0x219a0c0, 0x225f440)
0.100044s 1 ndn.Producer:OnInterest(): [INFO ] node(1) responding with
Data: /Interest1/%FE%22
0.100044s 2 ndn.Producer:OnInterest(0x219a420, 0x21b1700)
0.100044s 2 ndn.Producer:OnInterest(): [INFO ] node(2) responding with
Data: /Interest1/%FE%24
0.100532s 4 ndn.Consumer:OnData(0x21965c0, 0x2258790)
0.100532s 4 ndn.Consumer:OnData(): [INFO ] < DATA for 34
0.100532s 4 ndn.Consumer:OnData(): [DEBUG] Hop count: 1
0.200044s 1 ndn.Producer:OnInterest(0x219a0c0, 0x21bc720)


ᐧ

On Mon, Oct 11, 2021 at 10:21 AM sangita...... <sangita.engg at gmail.com>
wrote:

> Hi Zakaria and Sai,
>
> There are 6 consumer and each of them generates 10 interest / s for 50
> second. So each consumer will generate 500 interest  approximately.
> Consumer 0 , 3 , 4 will generate interest with prefix interest 1 with a set
> of 50 contents and the other consumers will generate interest with prefix
> interest 2 with a set of 50 content.
>
> @Zakaria SABIR <zakaria.sabir at uit.ac.ma>  are you getting these in log
> file ?
>
> On Mon, Oct 11, 2021, 01:21 sai gautams <saigautam96 at gmail.com> wrote:
>
>> Hi Zakaria and Sangita,
>>
>> I want to pop in and answer your question here. I have gone through the
>> entire thread, and it seems like a total of 500 interests will be generated
>> in your case, requesting 50 different types of content. Correct me,
>> Sangita, if I am wrong, as I am new to this area and still learning.
>>
>> On Sun, Oct 10, 2021 at 9:08 PM Zakaria SABIR <zakaria.sabir at uit.ac.ma>
>> wrote:
>>
>>> Yes, the script is the same I shared before:
>>>
>>>   ndn::AppHelper consumerHelper("ns3::ndn::ConsumerZipfMandelbrot");
>>>   consumerHelper.SetAttribute("Frequency", DoubleValue(10.0));
>>>   consumerHelper.SetAttribute("NumberOfContents", StringValue("50"));
>>>   consumerHelper.SetPrefix("/Interest1");
>>>   consumerHelper.Install(nodes.Get(0));
>>>   consumerHelper.Install(nodes.Get(3));
>>>   consumerHelper.Install(nodes.Get(4));
>>>
>>>   ndn::AppHelper consumerHelper2("ns3::ndn::ConsumerZipfMandelbrot");
>>>   consumerHelper2.SetAttribute("Frequency", DoubleValue(10.0));
>>>   consumerHelper2.SetAttribute("NumberOfContents", StringValue("50"));
>>>   consumerHelper2.SetPrefix("/Interest2");
>>>   consumerHelper2.Install(nodes.Get(6));
>>>   consumerHelper2.Install(nodes.Get(8));
>>>   consumerHelper2.Install(nodes.Get(5));
>>>
>>> and I have also 4 producers:
>>>
>>>   ndn::AppHelper producerHelper("ns3::ndn::Producer");
>>>   producerHelper.SetPrefix("/");
>>>   producerHelper.SetAttribute("PayloadSize", StringValue("1200"));
>>>   producerHelper.Install(nodes.Get(1));
>>>   producerHelper.Install(nodes.Get(2));
>>>   producerHelper.Install(nodes.Get(7));
>>>   producerHelper.Install(nodes.Get(9));
>>>>>>
>>> On Sun, Oct 10, 2021 at 10:52 AM sangita...... <sangita.engg at gmail.com>
>>> wrote:
>>>
>>>> Are all the  6 nodes are configured with consumer application ? Can you
>>>> share the script ?
>>>>
>>>> On Sun, Oct 10, 2021, 10:10 Zakaria SABIR <zakaria.sabir at uit.ac.ma>
>>>> wrote:
>>>>
>>>>> Hi Sangita,
>>>>>
>>>>> Thank you for the clarification, I understand now. But, is
>>>>> this depending on the number of nodes and the number of consumer
>>>>> applications? For example, in my case, I specified the number of contents
>>>>> to 50. I have the frequency set to 10 Interests / s and the simulation is
>>>>> running for 50 s. I have 2 consumer applications and 6 nodes. What is the
>>>>> total number of Interests that will be generated in this case?
>>>>>
>>>>> My best regards,
>>>>> Zakaria
>>>>>>>>>>
>>>>> On Sat, Oct 9, 2021 at 8:33 PM sangita...... <sangita.engg at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hi Zakaria,
>>>>>>
>>>>>> No I think you are missing a point that numberofcontent signifies
>>>>>> type of content. Now for example:  for type 1-content 10 interests can be
>>>>>> generated,..for type 2-content 4 interests ..for type 3-content 7 interests
>>>>>> ...likewise.
>>>>>>
>>>>>> Now the total no of interests that would generated depends on
>>>>>> frequency.
>>>>>>
>>>>>> Now if frequency is high let's say 100 per sec and your simulation is
>>>>>> running for 10 second then 1000 interests will  be generated.  But all
>>>>>> these interests will only request for 100 contents. Now which content will
>>>>>> be requested how many times depends on zipf distribution.
>>>>>>
>>>>>>
>>>>>> On Sat, Oct 9, 2021, 14:54 Zakaria SABIR <zakaria.sabir at uit.ac.ma>
>>>>>> wrote:
>>>>>>
>>>>>>> Yes, I found 88 Data responses for Interest1 and 48 Data responses
>>>>>>> for Interest2.
>>>>>>> I thought that regardless of the frequency rate, if the number of
>>>>>>> generated Interests reached the specified number of contents, no more
>>>>>>> Interests will be generated. It's not the case?
>>>>>>>
>>>>>>> My best regards,
>>>>>>> Zakaria
>>>>>>>>>>>>>>
>>>>>>> On Sat, Oct 9, 2021 at 1:09 PM sangita...... <sangita.engg at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> What do you mean by finding 88 content for interest1 and 48 for
>>>>>>>> interest 2 ?
>>>>>>>> 88 interest packets are generated with prefix intereste1 and 48
>>>>>>>> with prefix interest2 ?
>>>>>>>>
>>>>>>>> Why do you expect 100 content in log file ? How many interest would
>>>>>>>> be generated it depends on frequency rate and interest for which content
>>>>>>>> among 100 contents would be generated  that depends on  zipf distribution .
>>>>>>>>
>>>>>>>> With regards,
>>>>>>>> Sangita
>>>>>>>>
>>>>>>>> On Sat, Oct 9, 2021, 12:03 Zakaria SABIR <zakaria.sabir at uit.ac.ma>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> I tried to limit the number of contents to 100 (50 for Interest1
>>>>>>>>> and 50 for Interest2) like this:
>>>>>>>>>
>>>>>>>>>   ndn::AppHelper
>>>>>>>>> consumerHelper("ns3::ndn::ConsumerZipfMandelbrot");
>>>>>>>>>   consumerHelper.SetAttribute("Frequency", DoubleValue(10.0));
>>>>>>>>>   consumerHelper.SetAttribute("NumberOfContents",
>>>>>>>>> StringValue("50"));
>>>>>>>>>   consumerHelper.SetPrefix("/Interest1");
>>>>>>>>>   consumerHelper.Install(nodes.Get(0));
>>>>>>>>>   consumerHelper.Install(nodes.Get(3));
>>>>>>>>>   consumerHelper.Install(nodes.Get(4));
>>>>>>>>>
>>>>>>>>>   ndn::AppHelper
>>>>>>>>> consumerHelper2("ns3::ndn::ConsumerZipfMandelbrot");
>>>>>>>>>   consumerHelper2.SetAttribute("Frequency", DoubleValue(10.0));
>>>>>>>>>   consumerHelper2.SetAttribute("NumberOfContents",
>>>>>>>>> StringValue("50"));
>>>>>>>>>   consumerHelper2.SetPrefix("/Interest2");
>>>>>>>>>   consumerHelper2.Install(nodes.Get(6));
>>>>>>>>>   consumerHelper2.Install(nodes.Get(8));
>>>>>>>>>   consumerHelper2.Install(nodes.Get(5));
>>>>>>>>>
>>>>>>>>> I expected to find exactly 100 content in the log file, but I
>>>>>>>>> found 88 for Interest1 and 48 for Interest2.
>>>>>>>>> I wonder what the reason for this is??
>>>>>>>>>
>>>>>>>>> My best regards,
>>>>>>>>> Zakaria
>>>>>>>>>>>>>>>>>>
>>>>>>>>> On Sat, Oct 9, 2021 at 9:20 AM Zakaria SABIR <
>>>>>>>>> zakaria.sabir at uit.ac.ma> wrote:
>>>>>>>>>
>>>>>>>>>> Hi Sangita,
>>>>>>>>>>
>>>>>>>>>> Yes, it makes sense. Thank you for the explanation. I will try it
>>>>>>>>>> out.
>>>>>>>>>>
>>>>>>>>>> My best regards,
>>>>>>>>>> Zakaria
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>> On Fri, Oct 8, 2021 at 12:01 PM sangita...... <
>>>>>>>>>> sangita.engg at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi zakira,
>>>>>>>>>>>
>>>>>>>>>>> As per the ndn architecture whenever your interest arrive to a
>>>>>>>>>>> producer , it generate a data packet with the same name of interest .  So
>>>>>>>>>>> when you mention NumberOfContents as 100 it means there are 100 content for
>>>>>>>>>>> which interest packets will be generated following the distribution.
>>>>>>>>>>> Let's say it will generate the interests like /interest1 / 1 ,
>>>>>>>>>>> then interest1 / 5 , then interest1 / 16 and so on. And this interest/x  :
>>>>>>>>>>> x will vary between 1 - 100 when you mention the number of content 100.
>>>>>>>>>>> Again , if you generate another app for interest2 , then it
>>>>>>>>>>> will generate another set of 100 content with the prefix interest2.
>>>>>>>>>>>
>>>>>>>>>>> If you mention the NumberOfContents as 1000 , then it will vary
>>>>>>>>>>> till 1000.
>>>>>>>>>>>
>>>>>>>>>>> Does that make sense?
>>>>>>>>>>>
>>>>>>>>>>> Sangita
>>>>>>>>>>>
>>>>>>>>>>> On Fri, Oct 8, 2021, 11:50 Zakaria SABIR <
>>>>>>>>>>> zakaria.sabir at uit.ac.ma> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi Sangita,
>>>>>>>>>>>>
>>>>>>>>>>>> I see that there is another way to create different Interests.
>>>>>>>>>>>> But I didn't quite understand about the number of contents. In my case, I
>>>>>>>>>>>> want to define the maximum number of generated Interest packets in one
>>>>>>>>>>>> step, and I want to define the maximum number of generated Data packets in
>>>>>>>>>>>> another step. Does the line:
>>>>>>>>>>>> consumerHelper2.SetAttribute("NumberOfContents",
>>>>>>>>>>>> StringValue("100"));
>>>>>>>>>>>> specifies the maximum number of Interest or Data packets?
>>>>>>>>>>>>
>>>>>>>>>>>> My best regards,
>>>>>>>>>>>> Zakaria
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>> On Fri, Oct 8, 2021 at 11:17 AM sangita...... <
>>>>>>>>>>>> sangita.engg at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Zakaria,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Yes no of content means  total no of content that follows zipf
>>>>>>>>>>>>> distribution. The frequency of generating content 1 is double than content
>>>>>>>>>>>>> 2 and so on.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Another thing is you can generate different interests without
>>>>>>>>>>>>> making multiple app.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Like:
>>>>>>>>>>>>> In your ConsumerZipfMandelbrot header file you can mention
>>>>>>>>>>>>> Static const Name prefix = Name ( "/service");
>>>>>>>>>>>>>
>>>>>>>>>>>>> Then in ConsumerZipfMandelbrot .cc file you can set like
>>>>>>>>>>>>> this.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Name name = Name (prefix)
>>>>>>>>>>>>> If ( some condition)
>>>>>>>>>>>>> name.append ("interest 1")
>>>>>>>>>>>>> Else
>>>>>>>>>>>>> Name.append ("interest 2")
>>>>>>>>>>>>>
>>>>>>>>>>>>> Interest.setName (name)
>>>>>>>>>>>>>
>>>>>>>>>>>>> Anyway, both thing works. It depends how you want your
>>>>>>>>>>>>> implementation.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks and Regards,
>>>>>>>>>>>>> Sangita
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Fri, Oct 8, 2021, 10:45 Zakaria SABIR <
>>>>>>>>>>>>> zakaria.sabir at uit.ac.ma> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Sonia,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Yesterday, I found the error. To use two different Interests,
>>>>>>>>>>>>>> I had to create another app like this:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>   ndn::AppHelper *consumerHelper*("ns3::ndn::ConsumerCbr");
>>>>>>>>>>>>>>   consumerHelper.SetAttribute("Frequency", DoubleValue(10.0));
>>>>>>>>>>>>>>   consumerHelper.SetPrefix("*/Interest1*");
>>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(0));
>>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(3));
>>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(4));
>>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(5));
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>   ndn::AppHelper *consumerHelper2*("ns3::ndn::ConsumerCbr");
>>>>>>>>>>>>>>   consumerHelper2.SetAttribute("Frequency",
>>>>>>>>>>>>>> DoubleValue(10.0));
>>>>>>>>>>>>>>   consumerHelper2.SetPrefix("*/Interest2*");
>>>>>>>>>>>>>>   consumerHelper2.Install(nodes.Get(6));
>>>>>>>>>>>>>>   consumerHelper2.Install(nodes.Get(8));
>>>>>>>>>>>>>>   consumerHelper2.Install(nodes.Get(5));
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I did it that way and I used the command that you indicated
>>>>>>>>>>>>>> before (NS_LOG=ndn.Producer:ndn.Consumer ./waf --run="scenario"). The
>>>>>>>>>>>>>> "Interest2" appeared in the consumer log file as well. :)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Now I have another question: In the "ConsumerZipfMandelbrot"
>>>>>>>>>>>>>> application, what is the difference between these two attributes:
>>>>>>>>>>>>>> "NumberOfContents" and "Frequency"? I know that the frequency is the number
>>>>>>>>>>>>>> of Interests per second, but what about the number of contents? Is it the
>>>>>>>>>>>>>> maximum number of contents that producers can generate? or the maximum
>>>>>>>>>>>>>> number of Interests that consumers can generate?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> My best regards,
>>>>>>>>>>>>>> Zakaria
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Fri, Oct 8, 2021 at 3:39 AM sonia sabir <
>>>>>>>>>>>>>> zohanoor67 at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi Zakaria,[image: image.gif]
>>>>>>>>>>>>>>> It seems like Interest for /Interest2 has not been sent. Try
>>>>>>>>>>>>>>> this
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> consumerHelper.SetPrefix("/interest1");
>>>>>>>>>>>>>>> ApplicationContainer App1 =
>>>>>>>>>>>>>>> consumerHelper.Install(nodes.Get(6));
>>>>>>>>>>>>>>> App1.Start (Seconds (10.0));
>>>>>>>>>>>>>>> App1.Stop (Seconds (100.0));
>>>>>>>>>>>>>>> Do the same for "/Interest1".
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hope it works for you.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Wed, Oct 6, 2021 at 11:52 PM Zakaria SABIR <
>>>>>>>>>>>>>>> zakaria.sabir at uit.ac.ma> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thank you Sangita and Sonia,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I'm using "ConsumerCbr", son do I have to change in the
>>>>>>>>>>>>>>>> file "ndn-consumer-cbr.cpp"?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> For the commander: NS_LOG=ndn.Producer:ndn.Consumer ./waf
>>>>>>>>>>>>>>>> --run="scenario", it gives me just one type of Interest packet like this:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> 0s 5 ndn.Consumer:SendPacket(): [INFO ] > Interest for 0
>>>>>>>>>>>>>>>> 0s 5 ndn.Consumer:WillSendOutInterest(): [DEBUG] Trying to
>>>>>>>>>>>>>>>> add 0 with +0.0ns. already 0 items
>>>>>>>>>>>>>>>> 0s 6 ndn.Consumer:SendPacket()
>>>>>>>>>>>>>>>> 0s 6 ndn.Consumer:SendPacket(): [INFO ] > Interest for 0
>>>>>>>>>>>>>>>> 0s 6 ndn.Consumer:WillSendOutInterest(): [DEBUG] Trying to
>>>>>>>>>>>>>>>> add 0 with +0.0ns. already 0 items
>>>>>>>>>>>>>>>> 0s 8 ndn.Consumer:SendPacket()
>>>>>>>>>>>>>>>> 0s 8 ndn.Consumer:SendPacket(): [INFO ] > Interest for 0
>>>>>>>>>>>>>>>> 0s 8 ndn.Consumer:WillSendOutInterest(): [DEBUG] Trying to
>>>>>>>>>>>>>>>> add 0 with +0.0ns. already 0 items
>>>>>>>>>>>>>>>> 0.000127315s 9 ndn.Producer:OnInterest(0x19f49d0, 0x1a64910)
>>>>>>>>>>>>>>>> 0.000127315s 9 ndn.Producer:OnInterest(): [INFO ] node(9)
>>>>>>>>>>>>>>>> responding with Data: /*Interest1*/%FE%00
>>>>>>>>>>>>>>>> 0.000324162s 1 ndn.Producer:OnInterest(0x19f3f10, 0x1a587b0)
>>>>>>>>>>>>>>>> 0.000324162s 1 ndn.Producer:OnInterest(): [INFO ] node(1)
>>>>>>>>>>>>>>>> responding with Data: /*Interest1*/%FE%00
>>>>>>>>>>>>>>>> 0.000810172s 4 ndn.Consumer:OnData(0x19f1060, 0x1a4d0b0)
>>>>>>>>>>>>>>>> 0.000810172s 4 ndn.Consumer:OnData(): [INFO ] < DATA for 0
>>>>>>>>>>>>>>>> 0.000810172s 4 ndn.Consumer:OnData(): [DEBUG] Hop count: 1
>>>>>>>>>>>>>>>> 0.00102885s 2 ndn.Producer:OnInterest(0x19f4270, 0x1a40620)
>>>>>>>>>>>>>>>> 0.00102885s 2 ndn.Producer:OnInterest(): [INFO ] node(2)
>>>>>>>>>>>>>>>> responding with Data: /*Interest1*/%FE%00
>>>>>>>>>>>>>>>> 0.1s 0 ndn.Consumer:SendPacket()
>>>>>>>>>>>>>>>> 0.1s 0 ndn.Consumer:SendPacket(): [INFO ] > Interest for 1
>>>>>>>>>>>>>>>> 0.1s 0 ndn.Consumer:WillSendOutInterest(): [DEBUG] Trying
>>>>>>>>>>>>>>>> to add 1 with +100000000.0ns. already 1 items
>>>>>>>>>>>>>>>> 0.1s 3 ndn.Consumer:SendPacket()
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I don't know if I have an error in specifying two names of
>>>>>>>>>>>>>>>> Interest packets. Here is a part of my code:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>   ndn::AppHelper consumerHelper("ns3::ndn::ConsumerCbr");
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>   consumerHelper.SetPrefix("/Interest1");
>>>>>>>>>>>>>>>>   consumerHelper.SetAttribute("Frequency",
>>>>>>>>>>>>>>>> DoubleValue(10.0));
>>>>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(0));
>>>>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(3));
>>>>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(4));
>>>>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(5))
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>   consumerHelper.SetPrefix("/Interest2");
>>>>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(6));
>>>>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(8));
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>   ndn::AppHelper producerHelper("ns3::ndn::Producer");
>>>>>>>>>>>>>>>>   producerHelper.SetPrefix("/");
>>>>>>>>>>>>>>>>   producerHelper.SetAttribute("PayloadSize",
>>>>>>>>>>>>>>>> StringValue("1200"));
>>>>>>>>>>>>>>>>   producerHelper.Install(nodes.Get(1));
>>>>>>>>>>>>>>>>   producerHelper.Install(nodes.Get(2));
>>>>>>>>>>>>>>>>   producerHelper.Install(nodes.Get(7));
>>>>>>>>>>>>>>>>   producerHelper.Install(nodes.Get(9));
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> My best regards,
>>>>>>>>>>>>>>>> Zakaria
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Wed, Oct 6, 2021 at 2:40 AM sonia sabir <
>>>>>>>>>>>>>>>> zohanoor67 at gmail.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> [image: image.gif]You can see it in the consumer log
>>>>>>>>>>>>>>>>> file.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> run your scenario with consumer and producer log enabled
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> NS_LOG=ndn.Producer:ndn.Consumer ./waf --run="scenario"
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Regards
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Sonia
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Tue, Oct 5, 2021 at 7:29 PM Zakaria SABIR <
>>>>>>>>>>>>>>>>> zakaria.sabir at uit.ac.ma> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hi everyone, I hope you are well.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I have created two names of Interest packets in my
>>>>>>>>>>>>>>>>>> scenario, and I want to know how many times each Interest packet has been
>>>>>>>>>>>>>>>>>> forwarded. I tried to use the "L3RateTracer", but it just gives the number
>>>>>>>>>>>>>>>>>> of all the Interest packets.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Could you help me, please?
>>>>>>>>>>>>>>>>>> My best regards.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Zakaria
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>> ndnSIM mailing list
>>>>>>>>>>>>>>>>>> ndnSIM at lists.cs.ucla.edu
>>>>>>>>>>>>>>>>>> http://www.lists.cs.ucla.edu/mailman/listinfo/ndnsim
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> ndnSIM mailing list
>>>>>>>>>>>>>> ndnSIM at lists.cs.ucla.edu
>>>>>>>>>>>>>> http://www.lists.cs.ucla.edu/mailman/listinfo/ndnsim
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>> ndnSIM mailing list
>>> ndnSIM at lists.cs.ucla.edu
>>> http://www.lists.cs.ucla.edu/mailman/listinfo/ndnsim
>>>
>>
>>
>> --
>>
>> *Sai Gautam Mandapati*
>>
>> Deakin University
>>
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.lists.cs.ucla.edu/pipermail/ndnsim/attachments/20211011/09ba2f84/attachment-0001.html>


More information about the ndnSIM mailing list