[ndnSIM] Obtaining the number of Interest packets

sangita...... sangita.engg at gmail.com
Mon Oct 11 02:21:07 PDT 2021


Hi Zakaria and Sai,

There are 6 consumer and each of them generates 10 interest / s for 50
second. So each consumer will generate 500 interest  approximately.
Consumer 0 , 3 , 4 will generate interest with prefix interest 1 with a set
of 50 contents and the other consumers will generate interest with prefix
interest 2 with a set of 50 content.

@Zakaria SABIR <zakaria.sabir at uit.ac.ma>  are you getting these in log file
?

On Mon, Oct 11, 2021, 01:21 sai gautams <saigautam96 at gmail.com> wrote:

> Hi Zakaria and Sangita,
>
> I want to pop in and answer your question here. I have gone through the
> entire thread, and it seems like a total of 500 interests will be generated
> in your case, requesting 50 different types of content. Correct me,
> Sangita, if I am wrong, as I am new to this area and still learning.
>
> On Sun, Oct 10, 2021 at 9:08 PM Zakaria SABIR <zakaria.sabir at uit.ac.ma>
> wrote:
>
>> Yes, the script is the same I shared before:
>>
>>   ndn::AppHelper consumerHelper("ns3::ndn::ConsumerZipfMandelbrot");
>>   consumerHelper.SetAttribute("Frequency", DoubleValue(10.0));
>>   consumerHelper.SetAttribute("NumberOfContents", StringValue("50"));
>>   consumerHelper.SetPrefix("/Interest1");
>>   consumerHelper.Install(nodes.Get(0));
>>   consumerHelper.Install(nodes.Get(3));
>>   consumerHelper.Install(nodes.Get(4));
>>
>>   ndn::AppHelper consumerHelper2("ns3::ndn::ConsumerZipfMandelbrot");
>>   consumerHelper2.SetAttribute("Frequency", DoubleValue(10.0));
>>   consumerHelper2.SetAttribute("NumberOfContents", StringValue("50"));
>>   consumerHelper2.SetPrefix("/Interest2");
>>   consumerHelper2.Install(nodes.Get(6));
>>   consumerHelper2.Install(nodes.Get(8));
>>   consumerHelper2.Install(nodes.Get(5));
>>
>> and I have also 4 producers:
>>
>>   ndn::AppHelper producerHelper("ns3::ndn::Producer");
>>   producerHelper.SetPrefix("/");
>>   producerHelper.SetAttribute("PayloadSize", StringValue("1200"));
>>   producerHelper.Install(nodes.Get(1));
>>   producerHelper.Install(nodes.Get(2));
>>   producerHelper.Install(nodes.Get(7));
>>   producerHelper.Install(nodes.Get(9));
>>>>
>> On Sun, Oct 10, 2021 at 10:52 AM sangita...... <sangita.engg at gmail.com>
>> wrote:
>>
>>> Are all the  6 nodes are configured with consumer application ? Can you
>>> share the script ?
>>>
>>> On Sun, Oct 10, 2021, 10:10 Zakaria SABIR <zakaria.sabir at uit.ac.ma>
>>> wrote:
>>>
>>>> Hi Sangita,
>>>>
>>>> Thank you for the clarification, I understand now. But, is
>>>> this depending on the number of nodes and the number of consumer
>>>> applications? For example, in my case, I specified the number of contents
>>>> to 50. I have the frequency set to 10 Interests / s and the simulation is
>>>> running for 50 s. I have 2 consumer applications and 6 nodes. What is the
>>>> total number of Interests that will be generated in this case?
>>>>
>>>> My best regards,
>>>> Zakaria
>>>>>>>>
>>>> On Sat, Oct 9, 2021 at 8:33 PM sangita...... <sangita.engg at gmail.com>
>>>> wrote:
>>>>
>>>>> Hi Zakaria,
>>>>>
>>>>> No I think you are missing a point that numberofcontent signifies type
>>>>> of content. Now for example:  for type 1-content 10 interests can be
>>>>> generated,..for type 2-content 4 interests ..for type 3-content 7 interests
>>>>> ...likewise.
>>>>>
>>>>> Now the total no of interests that would generated depends on
>>>>> frequency.
>>>>>
>>>>> Now if frequency is high let's say 100 per sec and your simulation is
>>>>> running for 10 second then 1000 interests will  be generated.  But all
>>>>> these interests will only request for 100 contents. Now which content will
>>>>> be requested how many times depends on zipf distribution.
>>>>>
>>>>>
>>>>> On Sat, Oct 9, 2021, 14:54 Zakaria SABIR <zakaria.sabir at uit.ac.ma>
>>>>> wrote:
>>>>>
>>>>>> Yes, I found 88 Data responses for Interest1 and 48 Data responses
>>>>>> for Interest2.
>>>>>> I thought that regardless of the frequency rate, if the number of
>>>>>> generated Interests reached the specified number of contents, no more
>>>>>> Interests will be generated. It's not the case?
>>>>>>
>>>>>> My best regards,
>>>>>> Zakaria
>>>>>>>>>>>>
>>>>>> On Sat, Oct 9, 2021 at 1:09 PM sangita...... <sangita.engg at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> What do you mean by finding 88 content for interest1 and 48 for
>>>>>>> interest 2 ?
>>>>>>> 88 interest packets are generated with prefix intereste1 and 48 with
>>>>>>> prefix interest2 ?
>>>>>>>
>>>>>>> Why do you expect 100 content in log file ? How many interest would
>>>>>>> be generated it depends on frequency rate and interest for which content
>>>>>>> among 100 contents would be generated  that depends on  zipf distribution .
>>>>>>>
>>>>>>> With regards,
>>>>>>> Sangita
>>>>>>>
>>>>>>> On Sat, Oct 9, 2021, 12:03 Zakaria SABIR <zakaria.sabir at uit.ac.ma>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> I tried to limit the number of contents to 100 (50 for Interest1
>>>>>>>> and 50 for Interest2) like this:
>>>>>>>>
>>>>>>>>   ndn::AppHelper consumerHelper("ns3::ndn::ConsumerZipfMandelbrot");
>>>>>>>>   consumerHelper.SetAttribute("Frequency", DoubleValue(10.0));
>>>>>>>>   consumerHelper.SetAttribute("NumberOfContents",
>>>>>>>> StringValue("50"));
>>>>>>>>   consumerHelper.SetPrefix("/Interest1");
>>>>>>>>   consumerHelper.Install(nodes.Get(0));
>>>>>>>>   consumerHelper.Install(nodes.Get(3));
>>>>>>>>   consumerHelper.Install(nodes.Get(4));
>>>>>>>>
>>>>>>>>   ndn::AppHelper
>>>>>>>> consumerHelper2("ns3::ndn::ConsumerZipfMandelbrot");
>>>>>>>>   consumerHelper2.SetAttribute("Frequency", DoubleValue(10.0));
>>>>>>>>   consumerHelper2.SetAttribute("NumberOfContents",
>>>>>>>> StringValue("50"));
>>>>>>>>   consumerHelper2.SetPrefix("/Interest2");
>>>>>>>>   consumerHelper2.Install(nodes.Get(6));
>>>>>>>>   consumerHelper2.Install(nodes.Get(8));
>>>>>>>>   consumerHelper2.Install(nodes.Get(5));
>>>>>>>>
>>>>>>>> I expected to find exactly 100 content in the log file, but I found
>>>>>>>> 88 for Interest1 and 48 for Interest2.
>>>>>>>> I wonder what the reason for this is??
>>>>>>>>
>>>>>>>> My best regards,
>>>>>>>> Zakaria
>>>>>>>>>>>>>>>>
>>>>>>>> On Sat, Oct 9, 2021 at 9:20 AM Zakaria SABIR <
>>>>>>>> zakaria.sabir at uit.ac.ma> wrote:
>>>>>>>>
>>>>>>>>> Hi Sangita,
>>>>>>>>>
>>>>>>>>> Yes, it makes sense. Thank you for the explanation. I will try it
>>>>>>>>> out.
>>>>>>>>>
>>>>>>>>> My best regards,
>>>>>>>>> Zakaria
>>>>>>>>>>>>>>>>>>
>>>>>>>>> On Fri, Oct 8, 2021 at 12:01 PM sangita...... <
>>>>>>>>> sangita.engg at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Hi zakira,
>>>>>>>>>>
>>>>>>>>>> As per the ndn architecture whenever your interest arrive to a
>>>>>>>>>> producer , it generate a data packet with the same name of interest .  So
>>>>>>>>>> when you mention NumberOfContents as 100 it means there are 100 content for
>>>>>>>>>> which interest packets will be generated following the distribution.
>>>>>>>>>> Let's say it will generate the interests like /interest1 / 1 ,
>>>>>>>>>> then interest1 / 5 , then interest1 / 16 and so on. And this interest/x  :
>>>>>>>>>> x will vary between 1 - 100 when you mention the number of content 100.
>>>>>>>>>> Again , if you generate another app for interest2 , then it will
>>>>>>>>>> generate another set of 100 content with the prefix interest2.
>>>>>>>>>>
>>>>>>>>>> If you mention the NumberOfContents as 1000 , then it will vary
>>>>>>>>>> till 1000.
>>>>>>>>>>
>>>>>>>>>> Does that make sense?
>>>>>>>>>>
>>>>>>>>>> Sangita
>>>>>>>>>>
>>>>>>>>>> On Fri, Oct 8, 2021, 11:50 Zakaria SABIR <zakaria.sabir at uit.ac.ma>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi Sangita,
>>>>>>>>>>>
>>>>>>>>>>> I see that there is another way to create different Interests.
>>>>>>>>>>> But I didn't quite understand about the number of contents. In my case, I
>>>>>>>>>>> want to define the maximum number of generated Interest packets in one
>>>>>>>>>>> step, and I want to define the maximum number of generated Data packets in
>>>>>>>>>>> another step. Does the line:
>>>>>>>>>>> consumerHelper2.SetAttribute("NumberOfContents",
>>>>>>>>>>> StringValue("100"));
>>>>>>>>>>> specifies the maximum number of Interest or Data packets?
>>>>>>>>>>>
>>>>>>>>>>> My best regards,
>>>>>>>>>>> Zakaria
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>> On Fri, Oct 8, 2021 at 11:17 AM sangita...... <
>>>>>>>>>>> sangita.engg at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi Zakaria,
>>>>>>>>>>>>
>>>>>>>>>>>> Yes no of content means  total no of content that follows zipf
>>>>>>>>>>>> distribution. The frequency of generating content 1 is double than content
>>>>>>>>>>>> 2 and so on.
>>>>>>>>>>>>
>>>>>>>>>>>> Another thing is you can generate different interests without
>>>>>>>>>>>> making multiple app.
>>>>>>>>>>>>
>>>>>>>>>>>> Like:
>>>>>>>>>>>> In your ConsumerZipfMandelbrot header file you can mention
>>>>>>>>>>>> Static const Name prefix = Name ( "/service");
>>>>>>>>>>>>
>>>>>>>>>>>> Then in ConsumerZipfMandelbrot .cc file you can set like this.
>>>>>>>>>>>>
>>>>>>>>>>>> Name name = Name (prefix)
>>>>>>>>>>>> If ( some condition)
>>>>>>>>>>>> name.append ("interest 1")
>>>>>>>>>>>> Else
>>>>>>>>>>>> Name.append ("interest 2")
>>>>>>>>>>>>
>>>>>>>>>>>> Interest.setName (name)
>>>>>>>>>>>>
>>>>>>>>>>>> Anyway, both thing works. It depends how you want your
>>>>>>>>>>>> implementation.
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks and Regards,
>>>>>>>>>>>> Sangita
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Fri, Oct 8, 2021, 10:45 Zakaria SABIR <
>>>>>>>>>>>> zakaria.sabir at uit.ac.ma> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Sonia,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Yesterday, I found the error. To use two different Interests,
>>>>>>>>>>>>> I had to create another app like this:
>>>>>>>>>>>>>
>>>>>>>>>>>>>   ndn::AppHelper *consumerHelper*("ns3::ndn::ConsumerCbr");
>>>>>>>>>>>>>   consumerHelper.SetAttribute("Frequency", DoubleValue(10.0));
>>>>>>>>>>>>>   consumerHelper.SetPrefix("*/Interest1*");
>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(0));
>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(3));
>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(4));
>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(5));
>>>>>>>>>>>>>
>>>>>>>>>>>>>   ndn::AppHelper *consumerHelper2*("ns3::ndn::ConsumerCbr");
>>>>>>>>>>>>>   consumerHelper2.SetAttribute("Frequency", DoubleValue(10.0));
>>>>>>>>>>>>>   consumerHelper2.SetPrefix("*/Interest2*");
>>>>>>>>>>>>>   consumerHelper2.Install(nodes.Get(6));
>>>>>>>>>>>>>   consumerHelper2.Install(nodes.Get(8));
>>>>>>>>>>>>>   consumerHelper2.Install(nodes.Get(5));
>>>>>>>>>>>>>
>>>>>>>>>>>>> I did it that way and I used the command that you indicated
>>>>>>>>>>>>> before (NS_LOG=ndn.Producer:ndn.Consumer ./waf --run="scenario"). The
>>>>>>>>>>>>> "Interest2" appeared in the consumer log file as well. :)
>>>>>>>>>>>>>
>>>>>>>>>>>>> Now I have another question: In the "ConsumerZipfMandelbrot"
>>>>>>>>>>>>> application, what is the difference between these two attributes:
>>>>>>>>>>>>> "NumberOfContents" and "Frequency"? I know that the frequency is the number
>>>>>>>>>>>>> of Interests per second, but what about the number of contents? Is it the
>>>>>>>>>>>>> maximum number of contents that producers can generate? or the maximum
>>>>>>>>>>>>> number of Interests that consumers can generate?
>>>>>>>>>>>>>
>>>>>>>>>>>>> My best regards,
>>>>>>>>>>>>> Zakaria
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>> On Fri, Oct 8, 2021 at 3:39 AM sonia sabir <
>>>>>>>>>>>>> zohanoor67 at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Zakaria,[image: image.gif]
>>>>>>>>>>>>>> It seems like Interest for /Interest2 has not been sent. Try
>>>>>>>>>>>>>> this
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> consumerHelper.SetPrefix("/interest1");
>>>>>>>>>>>>>> ApplicationContainer App1 =
>>>>>>>>>>>>>> consumerHelper.Install(nodes.Get(6));
>>>>>>>>>>>>>> App1.Start (Seconds (10.0));
>>>>>>>>>>>>>> App1.Stop (Seconds (100.0));
>>>>>>>>>>>>>> Do the same for "/Interest1".
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hope it works for you.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Wed, Oct 6, 2021 at 11:52 PM Zakaria SABIR <
>>>>>>>>>>>>>> zakaria.sabir at uit.ac.ma> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thank you Sangita and Sonia,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I'm using "ConsumerCbr", son do I have to change in the file
>>>>>>>>>>>>>>> "ndn-consumer-cbr.cpp"?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> For the commander: NS_LOG=ndn.Producer:ndn.Consumer ./waf
>>>>>>>>>>>>>>> --run="scenario", it gives me just one type of Interest packet like this:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 0s 5 ndn.Consumer:SendPacket(): [INFO ] > Interest for 0
>>>>>>>>>>>>>>> 0s 5 ndn.Consumer:WillSendOutInterest(): [DEBUG] Trying to
>>>>>>>>>>>>>>> add 0 with +0.0ns. already 0 items
>>>>>>>>>>>>>>> 0s 6 ndn.Consumer:SendPacket()
>>>>>>>>>>>>>>> 0s 6 ndn.Consumer:SendPacket(): [INFO ] > Interest for 0
>>>>>>>>>>>>>>> 0s 6 ndn.Consumer:WillSendOutInterest(): [DEBUG] Trying to
>>>>>>>>>>>>>>> add 0 with +0.0ns. already 0 items
>>>>>>>>>>>>>>> 0s 8 ndn.Consumer:SendPacket()
>>>>>>>>>>>>>>> 0s 8 ndn.Consumer:SendPacket(): [INFO ] > Interest for 0
>>>>>>>>>>>>>>> 0s 8 ndn.Consumer:WillSendOutInterest(): [DEBUG] Trying to
>>>>>>>>>>>>>>> add 0 with +0.0ns. already 0 items
>>>>>>>>>>>>>>> 0.000127315s 9 ndn.Producer:OnInterest(0x19f49d0, 0x1a64910)
>>>>>>>>>>>>>>> 0.000127315s 9 ndn.Producer:OnInterest(): [INFO ] node(9)
>>>>>>>>>>>>>>> responding with Data: /*Interest1*/%FE%00
>>>>>>>>>>>>>>> 0.000324162s 1 ndn.Producer:OnInterest(0x19f3f10, 0x1a587b0)
>>>>>>>>>>>>>>> 0.000324162s 1 ndn.Producer:OnInterest(): [INFO ] node(1)
>>>>>>>>>>>>>>> responding with Data: /*Interest1*/%FE%00
>>>>>>>>>>>>>>> 0.000810172s 4 ndn.Consumer:OnData(0x19f1060, 0x1a4d0b0)
>>>>>>>>>>>>>>> 0.000810172s 4 ndn.Consumer:OnData(): [INFO ] < DATA for 0
>>>>>>>>>>>>>>> 0.000810172s 4 ndn.Consumer:OnData(): [DEBUG] Hop count: 1
>>>>>>>>>>>>>>> 0.00102885s 2 ndn.Producer:OnInterest(0x19f4270, 0x1a40620)
>>>>>>>>>>>>>>> 0.00102885s 2 ndn.Producer:OnInterest(): [INFO ] node(2)
>>>>>>>>>>>>>>> responding with Data: /*Interest1*/%FE%00
>>>>>>>>>>>>>>> 0.1s 0 ndn.Consumer:SendPacket()
>>>>>>>>>>>>>>> 0.1s 0 ndn.Consumer:SendPacket(): [INFO ] > Interest for 1
>>>>>>>>>>>>>>> 0.1s 0 ndn.Consumer:WillSendOutInterest(): [DEBUG] Trying to
>>>>>>>>>>>>>>> add 1 with +100000000.0ns. already 1 items
>>>>>>>>>>>>>>> 0.1s 3 ndn.Consumer:SendPacket()
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I don't know if I have an error in specifying two names of
>>>>>>>>>>>>>>> Interest packets. Here is a part of my code:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>   ndn::AppHelper consumerHelper("ns3::ndn::ConsumerCbr");
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>   consumerHelper.SetPrefix("/Interest1");
>>>>>>>>>>>>>>>   consumerHelper.SetAttribute("Frequency",
>>>>>>>>>>>>>>> DoubleValue(10.0));
>>>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(0));
>>>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(3));
>>>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(4));
>>>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(5))
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>   consumerHelper.SetPrefix("/Interest2");
>>>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(6));
>>>>>>>>>>>>>>>   consumerHelper.Install(nodes.Get(8));
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>   ndn::AppHelper producerHelper("ns3::ndn::Producer");
>>>>>>>>>>>>>>>   producerHelper.SetPrefix("/");
>>>>>>>>>>>>>>>   producerHelper.SetAttribute("PayloadSize",
>>>>>>>>>>>>>>> StringValue("1200"));
>>>>>>>>>>>>>>>   producerHelper.Install(nodes.Get(1));
>>>>>>>>>>>>>>>   producerHelper.Install(nodes.Get(2));
>>>>>>>>>>>>>>>   producerHelper.Install(nodes.Get(7));
>>>>>>>>>>>>>>>   producerHelper.Install(nodes.Get(9));
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> My best regards,
>>>>>>>>>>>>>>> Zakaria
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Wed, Oct 6, 2021 at 2:40 AM sonia sabir <
>>>>>>>>>>>>>>> zohanoor67 at gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> [image: image.gif]You can see it in the consumer log file.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> run your scenario with consumer and producer log enabled
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> NS_LOG=ndn.Producer:ndn.Consumer ./waf --run="scenario"
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Regards
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Sonia
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Tue, Oct 5, 2021 at 7:29 PM Zakaria SABIR <
>>>>>>>>>>>>>>>> zakaria.sabir at uit.ac.ma> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi everyone, I hope you are well.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I have created two names of Interest packets in my
>>>>>>>>>>>>>>>>> scenario, and I want to know how many times each Interest packet has been
>>>>>>>>>>>>>>>>> forwarded. I tried to use the "L3RateTracer", but it just gives the number
>>>>>>>>>>>>>>>>> of all the Interest packets.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Could you help me, please?
>>>>>>>>>>>>>>>>> My best regards.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Zakaria
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>> ndnSIM mailing list
>>>>>>>>>>>>>>>>> ndnSIM at lists.cs.ucla.edu
>>>>>>>>>>>>>>>>> http://www.lists.cs.ucla.edu/mailman/listinfo/ndnsim
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> ndnSIM mailing list
>>>>>>>>>>>>> ndnSIM at lists.cs.ucla.edu
>>>>>>>>>>>>> http://www.lists.cs.ucla.edu/mailman/listinfo/ndnsim
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>> ndnSIM mailing list
>> ndnSIM at lists.cs.ucla.edu
>> http://www.lists.cs.ucla.edu/mailman/listinfo/ndnsim
>>
>
>
> --
>
> *Sai Gautam Mandapati*
>
> Deakin University
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.lists.cs.ucla.edu/pipermail/ndnsim/attachments/20211011/ec24c55c/attachment-0001.html>


More information about the ndnSIM mailing list