[ndnSIM] applications

Spyridon Mastorakis smastorakis at unomaha.edu
Thu Nov 12 18:39:49 PST 2020


Hi,

I would suggest that you enable the nfd.Forwarder logging component to see what is going on at the NFD level.

Thanks,

Spyridon (Spyros) Mastorakis
Assistant Professor
Computer Science Department
University of Nebraska, Omaha
Peter Kiewit Institute Room 175A
https://sites.google.com/site/spyridonmastorakis

On Nov 12, 2020, at 6:06 AM, Hafsteinn Hjartarson via ndnSIM <ndnsim at lists.cs.ucla.edu<mailto:ndnsim at lists.cs.ucla.edu>> wrote:

Hi Everyone,

When using the custom applications provided with the examples (https://ndnsim.net/2.4/applications.html#customer-example<https://urldefense.proofpoint.com/v2/url?u=https-3A__ndnsim.net_2.4_applications.html-23customer-2Dexample&d=DwMFaQ&c=Cu5g146wZdoqVuKpTNsYHeFX_rg6kWhlkLF8Eft-wwo&r=eI5Bh74ovG-uIXQ5ksQETSPgRFzmJXjIZXneCqw580E&m=gdQsxKp731SqsqYuSGCbIaKzilhsxAFCuRNVHgmFvf0&s=Fkw05yospMkOzR9bi_AHRLLMKCeQSJZYBwvFnyvy2iE&e=>), both CustomApp and Hijacker are installed on the same node (why does that even work?).

Is it not possible to create a topology like:

"CustomApp" <---> "ndn_router_1" <---> "Hijacker"

I have tried using the "Simple Scenario" from https://ndnsim.net/current/examples.html<https://urldefense.proofpoint.com/v2/url?u=https-3A__ndnsim.net_current_examples.html&d=DwMFaQ&c=Cu5g146wZdoqVuKpTNsYHeFX_rg6kWhlkLF8Eft-wwo&r=eI5Bh74ovG-uIXQ5ksQETSPgRFzmJXjIZXneCqw580E&m=gdQsxKp731SqsqYuSGCbIaKzilhsxAFCuRNVHgmFvf0&s=q-AlCSkUC2IobLd7PVwz2d4gUNB7DawFb7MxmKZkal8&e=> to create three nodes with p2p links between them and then installing "CustomApp" on node_0 and "Hijacker" on node_2 but they cannot communicate.

Can anyone help me with this?

Best regards,
Hafsteinn


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.lists.cs.ucla.edu/pipermail/ndnsim/attachments/20201113/a3d6f96c/attachment-0001.html>


More information about the ndnSIM mailing list