[ndnSIM] Using the ComsumerWindow Application

Spyridon (Spyros) Mastorakis mastorakis at cs.ucla.edu
Mon Mar 19 15:06:55 PDT 2018


Hi Ashiq,

could you please paste on gist your simulation scenario too, so that I can try to run it?

Thanks,

Spyridon (Spyros) Mastorakis
Personal Website: http://cs.ucla.edu/~mastorakis/ <http://cs.ucla.edu/~mastorakis/>
Internet Research Laboratory
Computer Science Department
UCLA

> On Mar 19, 2018, at 11:45 AM, Md Ashiqur Rahman <marahman at email.arizona.edu> wrote:
> 
> Hello Spyros,
> 
> Yes. I have. Here's the logging for consumer and producer in a simulation with 1 STATION node and 3 seconds of simulation with no data size limit as described earlier:
> 
> +0.000000000s -1 ndn.Consumer:Consumer()
> +0.000000000s -1 ndn.Consumer:Consumer()
> +0.000000000s -1 ndn.Producer:Producer()
> +0.000000000s 53 ndn.Producer:StartApplication()
> +0.000000000s 54 ndn.Consumer:StartApplication()
> +0.000000000s 54 ndn.Consumer:StartApplication()
> +0.000000000s 54 ndn.Consumer:SendPacket()
> +0.000000000s 54 ndn.Consumer:SendPacket()
> 
> However, when I do set a data size limit (e.g. 2MB), then it's working without any issue. Here's the log for this: https://gist.github.com/ashiqopu/53328e29f0f8aa74749ca79880f61724 <https://gist.github.com/ashiqopu/53328e29f0f8aa74749ca79880f61724>
> 
> Regards-
> Ashiq
> 
> On Mon, Mar 19, 2018 at 8:46 AM, Spyridon (Spyros) Mastorakis <mastorakis at cs.ucla.edu <mailto:mastorakis at cs.ucla.edu>> wrote:
> Hi,
> 
> have you enabled the application logging component to see what’s going on?
> 
> Thanks,
> 
> Spyridon (Spyros) Mastorakis
> Personal Website: http://cs.ucla.edu/~mastorakis/ <http://cs.ucla.edu/~mastorakis/>
> Internet Research Laboratory
> Computer Science Department
> UCLA
> 
>> On Mar 16, 2018, at 12:15 PM, Md Ashiqur Rahman <marahman at email.arizona.edu <mailto:marahman at email.arizona.edu>> wrote:
>> 
>> Hello all,
>> 
>> I am trying to utilize the ConsumerWindow application where my Payload size is to be 512 bytes and send interests until simulation ends. However, I do not see any Interest being sent out. I did other experiments with the ConsumerCbr application in same scenario setup and that worked fine. What could I possibly be doing wrong?
>> 
>> Regards-
>> Ashiq
> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.lists.cs.ucla.edu/pipermail/ndnsim/attachments/20180319/9122268c/attachment.html>


More information about the ndnSIM mailing list