[ndnSIM] Problem in installing ndnSIM 2.1 / 2.2

Thu Sep 21 02:17:31 PDT 2017

I tried specifying the location, but it did not solve the problem and the
same error is still there. I suspect the problem is with the version..

Which version of cryptopp was ndnSIM-2.1 using ? . Currently, my the
version installed on my machine is libcrypto++-dev
5.6.1-6+deb8u3build0.14.04.1. And on your official webpage you are always
asking people to install -dev version.

Thanks,
C

On Thu, Sep 21, 2017 at 12:13 AM, Spyridon (Spyros) Mastorakis <
mastorakis at cs.ucla.edu> wrote:

> Also, waf gives you an option to specify where the cryptopp library is
> located (run ./waf -h for more details):
>
> --with-cryptopp=CRYPTOPP_DIR
> Path to where CryptoPP is installed, e.g., /usr/local
>
> By default, they assume that it is located under /usr/local if I am not
> mistaken.
>
> Thanks,
>
> Spyridon (Spyros) Mastorakis
> Personal Website: http://cs.ucla.edu/~mastorakis/
> Internet Research Laboratory
> Computer Science Department
> UCLA
>
> On Sep 20, 2017, at 3:10 PM, John Baugh <jpbaugh at umich.edu> wrote:
>
> Try copying / reinstalling CryptoPP to use/local/lib
>
> On Sep 20, 2017 6:06 PM, "Carl Zu" <carlzu8 at gmail.com> wrote:
>
>> Hi John,
>>
>> In usr/lib. And please find attached config.log if it is needed.
>>
>> Regards,
>> C
>>
>> On Wed, Sep 20, 2017 at 11:41 PM, John Baugh <jpbaugh at umich.edu> wrote:
>>
>>> Where do you have CryptoPP installed?  What directory?
>>>
>>> On Sep 20, 2017 5:39 PM, "Carl Zu" <carlzu8 at gmail.com> wrote:
>>>
>>>> Dear Spyridon,
>>>>
>>>> Could you please give me some more hints?
>>>>
>>>> Thanks,
>>>> C
>>>>
>>>> On Wed, Sep 20, 2017 at 9:07 PM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>
>>>>> Hi Spyridon,
>>>>>
>>>>> Thanks for the link. I read it carefully. However, I still have a
>>>>> couple of questions below:
>>>>>
>>>>> 1. is the cryptoPP version(s) associated with ndnSIM's 2.1, 2.2, and
>>>>> 2.3 different ?. If this is the case, one cannot have different versions of
>>>>> ndnSIM installed on a single machine. Right?
>>>>>
>>>>> 2. I could not find any information regarding the appropriate versions
>>>>> of cryptoPP for each of 2.1, 2.2, and 2.3 releases.
>>>>>
>>>>> Thank you for your guidance in advance.
>>>>>
>>>>> -C
>>>>>
>>>>> On Wed, Sep 20, 2017 at 8:51 PM, Spyridon (Spyros) Mastorakis <
>>>>> mastorakis at cs.ucla.edu> wrote:
>>>>>
>>>>>> Probably you are using a different version of CryptoPP that the one
>>>>>> expected.
>>>>>>
>>>>>> Please take a look here:
>>>>>>
>>>>>> https://github.com/named-data-ndnSIM/ndnSIM/issues/81#issuec
>>>>>> omment-328081673
>>>>>>
>>>>>> Spyridon (Spyros) Mastorakis
>>>>>> Personal Website: http://cs.ucla.edu/~mastorakis/
>>>>>> Internet Research Laboratory
>>>>>> Computer Science Department
>>>>>> UCLA
>>>>>>
>>>>>> On Sep 20, 2017, at 11:49 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>>>
>>>>>> Thank you Spyridon.
>>>>>>
>>>>>> Yes, just figured out that for ndnSIM 2.1, I need to download version
>>>>>> 0.3.4 for NFD and ndn-cxx. Now, it configures, but it says:
>>>>>>
>>>>>> CryptoPP is present, but is not usable
>>>>>> (complete log in /home/carl/ndnSIM-2.1/ns-3/build/config.log)
>>>>>>
>>>>>> I have installed all the prerequisites completely. What could be
>>>>>> wrong here.
>>>>>>
>>>>>> Thanks,
>>>>>> C
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Wed, Sep 20, 2017 at 8:43 PM, Spyridon (Spyros) Mastorakis <
>>>>>> mastorakis at cs.ucla.edu> wrote:
>>>>>>
>>>>>>> Take a look at the release notes of each version. The NFD and
>>>>>>> ndn-cxx versions are mentioned there.
>>>>>>>
>>>>>>> Then, follow those links and clone the branches with the appropriate
>>>>>>> version:
>>>>>>>
>>>>>>> https://github.com/named-data-ndnSIM/ndn-cxx
>>>>>>> https://github.com/named-data-ndnSIM/NFD
>>>>>>>
>>>>>>> Thanks,
>>>>>>>
>>>>>>> Spyridon (Spyros) Mastorakis
>>>>>>> Personal Website: http://cs.ucla.edu/~mastorakis/
>>>>>>> Internet Research Laboratory
>>>>>>> Computer Science Department
>>>>>>> UCLA
>>>>>>>
>>>>>>> On Sep 20, 2017, at 11:39 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>>>>
>>>>>>> Hi Spyridon,
>>>>>>>
>>>>>>> Correct.
>>>>>>>
>>>>>>> Which NFD and ndn-cxx versions are associated with 2.1 and 2.2 ?
>>>>>>> Could you please give me instructions how can I do this with clone and with
>>>>>>> recursive flag ?
>>>>>>>
>>>>>>> Thanks,
>>>>>>> C
>>>>>>>
>>>>>>> On Wed, Sep 20, 2017 at 8:37 PM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>>>>
>>>>>>>> Hi Spyridon,
>>>>>>>>
>>>>>>>> Correct.
>>>>>>>>
>>>>>>>> Which NFD and ndn-cxx versions are associated with 2.1 and 2.2 ?
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> C
>>>>>>>>
>>>>>>>> On Wed, Sep 20, 2017 at 8:34 PM, Spyridon (Spyros) Mastorakis <
>>>>>>>> mastorakis at cs.ucla.edu> wrote:
>>>>>>>>
>>>>>>>>> NFD and ndn-cxx are linked as github submodules with the simulator.
>>>>>>>>>
>>>>>>>>> Unless you use git clone with the —recursive flag on, you will
>>>>>>>>> download the ndnSIM source code that contains 2 empty directories named NFD
>>>>>>>>> and ndn-cxx.
>>>>>>>>>
>>>>>>>>> Spyridon (Spyros) Mastorakis
>>>>>>>>> Personal Website: http://cs.ucla.edu/~mastorakis/
>>>>>>>>> Internet Research Laboratory
>>>>>>>>> Computer Science Department
>>>>>>>>> UCLA
>>>>>>>>>
>>>>>>>>> On Sep 20, 2017, at 11:31 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>> Hi all,
>>>>>>>>>
>>>>>>>>> @John: I am on ubuntu 14.04.
>>>>>>>>>
>>>>>>>>> @Spyridon: When I use the following link to download 2.1, how
>>>>>>>>> could I download the wrong NFD and ndn-cxx versions associated
>>>>>>>>> with this simulator ?
>>>>>>>>>
>>>>>>>>> https://github.com/named-data-ndnSIM/ndnSIM/releases/tag/ndn
>>>>>>>>> SIM-2.1
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>> C
>>>>>>>>>
>>>>>>>>> On Wed, Sep 20, 2017 at 8:26 PM, Spyridon (Spyros) Mastorakis <
>>>>>>>>> mastorakis at cs.ucla.edu> wrote:
>>>>>>>>>
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> are you sure you download the appropriate NFD and ndn-cxx
>>>>>>>>>> versions associated with the simulator too?
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>>
>>>>>>>>>> Spyridon (Spyros) Mastorakis
>>>>>>>>>> Personal Website: http://cs.ucla.edu/~mastorakis/
>>>>>>>>>> Internet Research Laboratory
>>>>>>>>>> Computer Science Department
>>>>>>>>>> UCLA
>>>>>>>>>>
>>>>>>>>>> On Sep 20, 2017, at 11:18 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>> Hi everyone,
>>>>>>>>>>
>>>>>>>>>> I need to install ndnSIM 2.1.I downloaded ndnSIM 2.1 from here:
>>>>>>>>>>
>>>>>>>>>> https://github.com/named-data-ndnSIM/ndnSIM/releases/tag/ndn
>>>>>>>>>> SIM-2.1
>>>>>>>>>>
>>>>>>>>>> As for "ns-3" and "pybindgen", first, I did the following:
>>>>>>>>>>
>>>>>>>>>> git clone https://github.com/named-data-ndnSIM/ns-3-dev.git ns-3
>>>>>>>>>> git clone https://github.com/named-data-ndnSIM/pybindgen.git pybindgen
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> After, I tried also downloading older versions of "pybindgen" as well as "ns-3". But in any case, when I write "./waf configure --enable-examples", I have the following error:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Traceback (most recent call last):
>>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Scripting.py", line 108, in waf_entry_point
>>>>>>>>>>     run_commands()
>>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Scripting.py", line 165, in run_commands
>>>>>>>>>>     parse_options()
>>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Scripting.py", line 138, in parse_options
>>>>>>>>>>     Context.create_context('options').execute()
>>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Options.py", line 146, in execute
>>>>>>>>>>     super(OptionsContext,self).execute()
>>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 92, in execute
>>>>>>>>>>     self.recurse([os.path.dirname(g_module.root_path)])
>>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 133, in recurse
>>>>>>>>>>     user_function(self)
>>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/wscript", line 213, in options
>>>>>>>>>>     opt.recurse('src')
>>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 133, in recurse
>>>>>>>>>>     user_function(self)
>>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/src/wscript", line 48, in options
>>>>>>>>>>     opt.recurse(module, mandatory=False)
>>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 133, in recurse
>>>>>>>>>>     user_function(self)
>>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/src/ndnSIM/wscript", line 16, in options
>>>>>>>>>>     opt.load(['version'], tooldir=['%s/.waf-tools' % opt.path.abspath()])
>>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 86, in load
>>>>>>>>>>     module=load_tool(t,path)
>>>>>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 342, in load_tool
>>>>>>>>>>     __import__(tool)
>>>>>>>>>> ImportError: No module named version
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> I have the same problem for installing ndnSIM 2.2 as well. That is, I can only install the latest version. Does anybody have a successful experience on installing 2.1 or 2.2 ? I highly appreciate any guidance.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>>
>>>>>>>>>> C
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.lists.cs.ucla.edu/pipermail/ndnsim/attachments/20170921/a66f18a5/attachment-0001.html>