[ndnSIM] Getting error while compiling

[Aniket Yeole]

Greetings all,

I am trying to install ndnsim as mentioned on the website (
http://ndnsim.net/2.2/). But while doing so I am facing some problems like
there are error while installation.

when I executed "./waf configure --enable-examples" i got following errors


PlanetLab FdNetDevice         : not enabled (PlanetLab operating system not
detected (see option --force-planetlab))
Network Simulation Cradle     : not enabled (NSC not found (see option
--with-nsc))
MPI Support                   : not enabled (option --enable-mpi not
selected)
ndnSIM                        : enabled
NS-3 OpenFlow Integration     : not enabled (OpenFlow not enabled (see
option --with-openflow))
SQlite stats data output      : enabled
Tap Bridge                    : enabled
PyViz visualizer              : not enabled (Python Bindings are needed but
not enabled)
Use sudo to set suid bit      : not enabled (option --enable-sudo not
selected)
Build tests                   : not enabled (defaults to disabled)
Build examples                : enabled
GNU Scientific Library (GSL)  : not enabled (GSL not found)
'configure' finished successfully (16.575s)

Should I ignore them ?

I continued the installation process ignoring the error and while compiling
the program ndn-simple.cpp I got following error

/usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/crt1.o: In
function `_start':
(.text+0x20): undefined reference to `main'
collect2: error: ld returned 1 exit status

Waf: Leaving directory `/home/a/KL/ndnsim/ns-3/build'
Build failed
 -> task in 'RemoteSystemsTempFiles' failed (exit status 1):
{task 140133562240336: cxxprogram  -> RemoteSystemsTempFiles}
['/usr/bin/g++', '-pthread', '-pthread', '-o',
'/home/a/KL/ndnsim/ns-3/build/scratch/RemoteSystemsTempFiles/RemoteSystemsTempFiles',
'-Wl,-Bstatic', '-Wl,-Bdynamic', '-Wl,--no-as-needed', '-L.',
'-L/usr/lib/x86_64-linux-gnu', '-L/usr/lib', '-lns3-dev-lr-wpan-debug',
'-lns3-dev-netanim-debug', '-lns3-dev-lte-debug',
'-lns3-dev-spectrum-debug', '-lns3-dev-antenna-debug',
'-lns3-dev-aodv-debug', '-lns3-dev-dsr-debug', '-lns3-dev-mesh-debug',
'-lns3-dev-ndnSIM-debug', '-lns3-dev-test-debug', '-lns3-dev-wave-debug',
'-lns3-dev-wifi-debug', '-lns3-dev-applications-debug',
'-lns3-dev-csma-layout-debug', '-lns3-dev-dsdv-debug',
'-lns3-dev-flow-monitor-debug', '-lns3-dev-point-to-point-layout-debug',
'-lns3-dev-wimax-debug', '-lns3-dev-nix-vector-routing-debug',
'-lns3-dev-olsr-debug', '-lns3-dev-sixlowpan-debug',
'-lns3-dev-tap-bridge-debug', '-lns3-dev-internet-debug',
'-lns3-dev-bridge-debug', '-lns3-dev-point-to-point-debug',
'-lns3-dev-mpi-debug', '-lns3-dev-buildings-debug',
'-lns3-dev-config-store-debug', '-lns3-dev-propagation-debug',
'-lns3-dev-uan-debug', '-lns3-dev-mobility-debug',
'-lns3-dev-energy-debug', '-lns3-dev-csma-debug',
'-lns3-dev-fd-net-device-debug', '-lns3-dev-virtual-net-device-debug',
'-lns3-dev-topology-read-debug', '-lns3-dev-network-debug',
'-lns3-dev-stats-debug', '-lns3-dev-core-debug', '-lrt', '-lpthread',
'-lsqlite3', '-lgtk-x11-2.0', '-lgdk-x11-2.0', '-lpangocairo-1.0',
'-latk-1.0', '-lcairo', '-lgdk_pixbuf-2.0', '-lgio-2.0', '-lpangoft2-1.0',
'-lpango-1.0', '-lgobject-2.0', '-lglib-2.0', '-lfontconfig', '-lfreetype',
'-lxml2', '-lboost_graph', '-lboost_thread', '-lboost_unit_test_framework',
'-lboost_system', '-lboost_random', '-lboost_date_time',
'-lboost_iostreams', '-lboost_regex', '-lboost_program_options',
'-lboost_chrono', '-lboost_filesystem', '-lboost_system',
'-lboost_signals', '-lboost_filesystem', '-lcryptopp']


what should I do to eliminate this errors.

Please help.

Regards,
Aniket
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.lists.cs.ucla.edu/pipermail/ndnsim/attachments/20161119/fb882602/attachment.html>