[ndnSIM] Regards Nodes/Simulator packet/traffic information

[Hitesh Wadekar]

Thank you Spyridon !
I will check the code. Also, better just print or count on each node :)

Regards,
Hitesh

On Tue, Jul 7, 2015 at 12:37 AM, Spyridon (Spyros) Mastorakis <
spiros.mastorakis at gmail.com> wrote:

> Hi Hitesh,
>
> As a formal solution, I would suggest that you extend the existing
> L3RateTracer with the features that you want.
>
> A dirty solution would be to write a special application running on each
> node that will do this job.
>
> --
> Spyridon (Spyros) Mastorakis
> Personal Website: http://cs.ucla.edu/~mastorakis/
> Internet Research Laboratory
> PhD Computer Science
> UCLA
>
>
>
>
> > On Jul 6, 2015, at 5:52 PM, Hitesh Wadekar <wadekahn at clarkson.edu>
> wrote:
> >
> > Hi Spyridon/Alex,
> >
> > I am specially looking an information to extract from simulator or node
> with the following parameters.
> >
> > 1. Total no of specific sent/rcv interest packets (for instance,
> "/node1/xyz")
> > 2. Total no of specific sent/rcv data packets
> > 3. Total interest/data packets in that time span (simulator)
> >
> > I know ndn::L3RateTracer::InstallAll("rate-trace.txt", Seconds(1.0)),
> however, we will not get above information from rate-trace.
> >
> > I think if we could print interest/data prefix names along with other
> information in rate-trace, it would help.
> >
> > Let me know your input.
> >
> > Thank you for your help.
> >
> > Regards,
> > Hitesh
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.lists.cs.ucla.edu/pipermail/ndnsim/attachments/20150707/afb24eb2/attachment.html>