[ndnSIM] rocketfuel-maps help

Alex Afanasyev alexander.afanasyev at ucla.edu
Mon Nov 11 15:46:14 PST 2013


Hi Windya,

You have missed configuration/build step (https://github.com/cawka/ndnSIM-sample-topologies#compiling). After you have done with it (hopefully successfully), then you should not see the error anymore.

---
Alex

On Nov 7, 2013, at 6:07 AM, Windhya Rankothge <windyswsw at gmail.com> wrote:

> 
> Hi,
> 
> I am very new to ndnsim and ns3 environments and I want to simulate a topology graph using rocketfuel-maps-cch-to-annotaded tool.
> 
> I went thorough the ndnsim web site, mail list and found following instructions.
> 
> mkdir ns-dev
> cd ns-dev
> 
> git clone git://github.com/cawka/ns-3-dev-ndnSIM.git -b ns-3.16-ndnSIM ns-3
> git clone git://github.com/cawka/pybindgen.git pybindgen
> git clone git://github.com/NDN-Routing/ndnSIM.git -b v0.2.7 ns-3/src/ndnSIM
> 
> git clone git://github.com/cawka/ndnSIM-sample-topologies.git ndnSIM-sample-topologies
> 
> cd ns-3
> ./waf configure -d optimized
> ./waf
> sudo ./waf install
> ./waf shell
> cd ../ndnSIM-sample-topologies
> PKG_LIBRARY_PATH=/usr/local/lib NS_VIS_ASSIGN=1 ./waf --run example --vis
> 
> I used same commands, but I get the following error
> 
> u99319 at ws116615-ubuntu:~/ns-dev/ndnSIM-sample-topologies$ PKG_LIBRARY_PATH=/usr/local/lib NS_VIS_ASSIGN=1 ./waf --run example --vis
> The project was not configured: run "waf configure" first!
> 
> Please let me know where I am going wrong and I would highly appreciate any help on simulating a topology graph using rocketfuel-maps given.
> 
> 
> Best Regards,
>  
> Windhya Rankothge,
> Universitat Pompeu Fabra,
> Barcelona.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.lists.cs.ucla.edu/pipermail/ndnsim/attachments/20131111/30d439f6/attachment.html>


More information about the ndnSIM mailing list