[ndnSIM] Obtaining the number of Interest packets
sangita......
sangita.engg at gmail.com
Fri Oct 8 04:01:27 PDT 2021
Hi zakira,
As per the ndn architecture whenever your interest arrive to a producer ,
it generate a data packet with the same name of interest . So when you
mention NumberOfContents as 100 it means there are 100 content for which
interest packets will be generated following the distribution.
Let's say it will generate the interests like /interest1 / 1 , then
interest1 / 5 , then interest1 / 16 and so on. And this interest/x : x
will vary between 1 - 100 when you mention the number of content 100.
Again , if you generate another app for interest2 , then it will generate
another set of 100 content with the prefix interest2.
If you mention the NumberOfContents as 1000 , then it will vary till 1000.
Does that make sense?
Sangita
On Fri, Oct 8, 2021, 11:50 Zakaria SABIR <zakaria.sabir at uit.ac.ma> wrote:
> Hi Sangita,
>
> I see that there is another way to create different Interests. But I
> didn't quite understand about the number of contents. In my case, I want to
> define the maximum number of generated Interest packets in one step, and I
> want to define the maximum number of generated Data packets in another
> step. Does the line:
> consumerHelper2.SetAttribute("NumberOfContents", StringValue("100"));
> specifies the maximum number of Interest or Data packets?
>
> My best regards,
> Zakaria
> ᐧ
>
> On Fri, Oct 8, 2021 at 11:17 AM sangita...... <sangita.engg at gmail.com>
> wrote:
>
>> Hi Zakaria,
>>
>> Yes no of content means total no of content that follows zipf
>> distribution. The frequency of generating content 1 is double than content
>> 2 and so on.
>>
>> Another thing is you can generate different interests without making
>> multiple app.
>>
>> Like:
>> In your ConsumerZipfMandelbrot header file you can mention
>> Static const Name prefix = Name ( "/service");
>>
>> Then in ConsumerZipfMandelbrot .cc file you can set like this.
>>
>> Name name = Name (prefix)
>> If ( some condition)
>> name.append ("interest 1")
>> Else
>> Name.append ("interest 2")
>>
>> Interest.setName (name)
>>
>> Anyway, both thing works. It depends how you want your implementation.
>>
>> Thanks and Regards,
>> Sangita
>>
>>
>> On Fri, Oct 8, 2021, 10:45 Zakaria SABIR <zakaria.sabir at uit.ac.ma> wrote:
>>
>>> Hi Sonia,
>>>
>>> Yesterday, I found the error. To use two different Interests, I had to
>>> create another app like this:
>>>
>>> ndn::AppHelper *consumerHelper*("ns3::ndn::ConsumerCbr");
>>> consumerHelper.SetAttribute("Frequency", DoubleValue(10.0));
>>> consumerHelper.SetPrefix("*/Interest1*");
>>> consumerHelper.Install(nodes.Get(0));
>>> consumerHelper.Install(nodes.Get(3));
>>> consumerHelper.Install(nodes.Get(4));
>>> consumerHelper.Install(nodes.Get(5));
>>>
>>> ndn::AppHelper *consumerHelper2*("ns3::ndn::ConsumerCbr");
>>> consumerHelper2.SetAttribute("Frequency", DoubleValue(10.0));
>>> consumerHelper2.SetPrefix("*/Interest2*");
>>> consumerHelper2.Install(nodes.Get(6));
>>> consumerHelper2.Install(nodes.Get(8));
>>> consumerHelper2.Install(nodes.Get(5));
>>>
>>> I did it that way and I used the command that you indicated before
>>> (NS_LOG=ndn.Producer:ndn.Consumer ./waf --run="scenario"). The "Interest2"
>>> appeared in the consumer log file as well. :)
>>>
>>> Now I have another question: In the "ConsumerZipfMandelbrot"
>>> application, what is the difference between these two attributes:
>>> "NumberOfContents" and "Frequency"? I know that the frequency is the number
>>> of Interests per second, but what about the number of contents? Is it the
>>> maximum number of contents that producers can generate? or the maximum
>>> number of Interests that consumers can generate?
>>>
>>> My best regards,
>>> Zakaria
>>> ᐧ
>>>
>>> On Fri, Oct 8, 2021 at 3:39 AM sonia sabir <zohanoor67 at gmail.com> wrote:
>>>
>>>> Hi Zakaria,[image: image.gif]
>>>> It seems like Interest for /Interest2 has not been sent. Try this
>>>>
>>>> consumerHelper.SetPrefix("/interest1");
>>>> ApplicationContainer App1 = consumerHelper.Install(nodes.Get(6));
>>>> App1.Start (Seconds (10.0));
>>>> App1.Stop (Seconds (100.0));
>>>> Do the same for "/Interest1".
>>>>
>>>> Hope it works for you.
>>>>
>>>>
>>>>
>>>> On Wed, Oct 6, 2021 at 11:52 PM Zakaria SABIR <zakaria.sabir at uit.ac.ma>
>>>> wrote:
>>>>
>>>>> Thank you Sangita and Sonia,
>>>>>
>>>>> I'm using "ConsumerCbr", son do I have to change in the file
>>>>> "ndn-consumer-cbr.cpp"?
>>>>>
>>>>> For the commander: NS_LOG=ndn.Producer:ndn.Consumer ./waf
>>>>> --run="scenario", it gives me just one type of Interest packet like this:
>>>>>
>>>>> 0s 5 ndn.Consumer:SendPacket(): [INFO ] > Interest for 0
>>>>> 0s 5 ndn.Consumer:WillSendOutInterest(): [DEBUG] Trying to add 0 with
>>>>> +0.0ns. already 0 items
>>>>> 0s 6 ndn.Consumer:SendPacket()
>>>>> 0s 6 ndn.Consumer:SendPacket(): [INFO ] > Interest for 0
>>>>> 0s 6 ndn.Consumer:WillSendOutInterest(): [DEBUG] Trying to add 0 with
>>>>> +0.0ns. already 0 items
>>>>> 0s 8 ndn.Consumer:SendPacket()
>>>>> 0s 8 ndn.Consumer:SendPacket(): [INFO ] > Interest for 0
>>>>> 0s 8 ndn.Consumer:WillSendOutInterest(): [DEBUG] Trying to add 0 with
>>>>> +0.0ns. already 0 items
>>>>> 0.000127315s 9 ndn.Producer:OnInterest(0x19f49d0, 0x1a64910)
>>>>> 0.000127315s 9 ndn.Producer:OnInterest(): [INFO ] node(9) responding
>>>>> with Data: /*Interest1*/%FE%00
>>>>> 0.000324162s 1 ndn.Producer:OnInterest(0x19f3f10, 0x1a587b0)
>>>>> 0.000324162s 1 ndn.Producer:OnInterest(): [INFO ] node(1) responding
>>>>> with Data: /*Interest1*/%FE%00
>>>>> 0.000810172s 4 ndn.Consumer:OnData(0x19f1060, 0x1a4d0b0)
>>>>> 0.000810172s 4 ndn.Consumer:OnData(): [INFO ] < DATA for 0
>>>>> 0.000810172s 4 ndn.Consumer:OnData(): [DEBUG] Hop count: 1
>>>>> 0.00102885s 2 ndn.Producer:OnInterest(0x19f4270, 0x1a40620)
>>>>> 0.00102885s 2 ndn.Producer:OnInterest(): [INFO ] node(2) responding
>>>>> with Data: /*Interest1*/%FE%00
>>>>> 0.1s 0 ndn.Consumer:SendPacket()
>>>>> 0.1s 0 ndn.Consumer:SendPacket(): [INFO ] > Interest for 1
>>>>> 0.1s 0 ndn.Consumer:WillSendOutInterest(): [DEBUG] Trying to add 1
>>>>> with +100000000.0ns. already 1 items
>>>>> 0.1s 3 ndn.Consumer:SendPacket()
>>>>>
>>>>> I don't know if I have an error in specifying two names of Interest
>>>>> packets. Here is a part of my code:
>>>>>
>>>>> ndn::AppHelper consumerHelper("ns3::ndn::ConsumerCbr");
>>>>>
>>>>> consumerHelper.SetPrefix("/Interest1");
>>>>> consumerHelper.SetAttribute("Frequency", DoubleValue(10.0));
>>>>> consumerHelper.Install(nodes.Get(0));
>>>>> consumerHelper.Install(nodes.Get(3));
>>>>> consumerHelper.Install(nodes.Get(4));
>>>>> consumerHelper.Install(nodes.Get(5))
>>>>>
>>>>> consumerHelper.SetPrefix("/Interest2");
>>>>> consumerHelper.Install(nodes.Get(6));
>>>>> consumerHelper.Install(nodes.Get(8));
>>>>>
>>>>> ndn::AppHelper producerHelper("ns3::ndn::Producer");
>>>>> producerHelper.SetPrefix("/");
>>>>> producerHelper.SetAttribute("PayloadSize", StringValue("1200"));
>>>>> producerHelper.Install(nodes.Get(1));
>>>>> producerHelper.Install(nodes.Get(2));
>>>>> producerHelper.Install(nodes.Get(7));
>>>>> producerHelper.Install(nodes.Get(9));
>>>>>
>>>>> My best regards,
>>>>> Zakaria
>>>>> ᐧ
>>>>>
>>>>> On Wed, Oct 6, 2021 at 2:40 AM sonia sabir <zohanoor67 at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> [image: image.gif]You can see it in the consumer log file.
>>>>>>
>>>>>> run your scenario with consumer and producer log enabled
>>>>>>
>>>>>> NS_LOG=ndn.Producer:ndn.Consumer ./waf --run="scenario"
>>>>>>
>>>>>> Regards
>>>>>>
>>>>>> Sonia
>>>>>>
>>>>>> On Tue, Oct 5, 2021 at 7:29 PM Zakaria SABIR <zakaria.sabir at uit.ac.ma>
>>>>>> wrote:
>>>>>>
>>>>>>> Hi everyone, I hope you are well.
>>>>>>>
>>>>>>> I have created two names of Interest packets in my scenario, and I
>>>>>>> want to know how many times each Interest packet has been forwarded. I
>>>>>>> tried to use the "L3RateTracer", but it just gives the number of all
>>>>>>> the Interest packets.
>>>>>>>
>>>>>>> Could you help me, please?
>>>>>>> My best regards.
>>>>>>>
>>>>>>> Zakaria
>>>>>>> ᐧ
>>>>>>> _______________________________________________
>>>>>>> ndnSIM mailing list
>>>>>>> ndnSIM at lists.cs.ucla.edu
>>>>>>> http://www.lists.cs.ucla.edu/mailman/listinfo/ndnsim
>>>>>>>
>>>>>> _______________________________________________
>>> ndnSIM mailing list
>>> ndnSIM at lists.cs.ucla.edu
>>> http://www.lists.cs.ucla.edu/mailman/listinfo/ndnsim
>>>
>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.lists.cs.ucla.edu/pipermail/ndnsim/attachments/20211008/825b77c2/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.gif
Type: image/gif
Size: 42 bytes
Desc: not available
URL: <http://www.lists.cs.ucla.edu/pipermail/ndnsim/attachments/20211008/825b77c2/attachment-0002.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.gif
Type: image/gif
Size: 42 bytes
Desc: not available
URL: <http://www.lists.cs.ucla.edu/pipermail/ndnsim/attachments/20211008/825b77c2/attachment-0003.gif>
More information about the ndnSIM
mailing list