[ndnSIM] Problem in installing ndnSIM 2.1 / 2.2

Carl Zu carlzu8 at gmail.com
Wed Sep 20 12:07:07 PDT 2017 

Hi Spyridon,

Thanks for the link. I read it carefully. However, I still have a couple of
questions below:

1. is the cryptoPP version(s) associated with ndnSIM's 2.1, 2.2, and 2.3
different ?. If this is the case, one cannot have different versions of
ndnSIM installed on a single machine. Right?

2. I could not find any information regarding the appropriate versions of
cryptoPP for each of 2.1, 2.2, and 2.3 releases.

Thank you for your guidance in advance.

-C

On Wed, Sep 20, 2017 at 8:51 PM, Spyridon (Spyros) Mastorakis <
mastorakis at cs.ucla.edu> wrote:

> Probably you are using a different version of CryptoPP that the one
> expected.
>
> Please take a look here:
>
> https://github.com/named-data-ndnSIM/ndnSIM/issues/81#
> issuecomment-328081673
>
> Spyridon (Spyros) Mastorakis
> Personal Website: http://cs.ucla.edu/~mastorakis/
> Internet Research Laboratory
> Computer Science Department
> UCLA
>
> On Sep 20, 2017, at 11:49 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>
> Thank you Spyridon.
>
> Yes, just figured out that for ndnSIM 2.1, I need to download version
> 0.3.4 for NFD and ndn-cxx. Now, it configures, but it says:
>
> CryptoPP is present, but is not usable
> (complete log in /home/carl/ndnSIM-2.1/ns-3/build/config.log)
>
> I have installed all the prerequisites completely. What could be wrong
> here.
>
> Thanks,
> C
>
>
>
> On Wed, Sep 20, 2017 at 8:43 PM, Spyridon (Spyros) Mastorakis <
> mastorakis at cs.ucla.edu> wrote:
>
>> Take a look at the release notes of each version. The NFD and ndn-cxx
>> versions are mentioned there.
>>
>> Then, follow those links and clone the branches with the appropriate
>> version:
>>
>> https://github.com/named-data-ndnSIM/ndn-cxx
>> https://github.com/named-data-ndnSIM/NFD
>>
>> Thanks,
>>
>> Spyridon (Spyros) Mastorakis
>> Personal Website: http://cs.ucla.edu/~mastorakis/
>> Internet Research Laboratory
>> Computer Science Department
>> UCLA
>>
>> On Sep 20, 2017, at 11:39 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>
>> Hi Spyridon,
>>
>> Correct.
>>
>> Which NFD and ndn-cxx versions are associated with 2.1 and 2.2 ? Could
>> you please give me instructions how can I do this with clone and with
>> recursive flag ?
>>
>> Thanks,
>> C
>>
>> On Wed, Sep 20, 2017 at 8:37 PM, Carl Zu <carlzu8 at gmail.com> wrote:
>>
>>> Hi Spyridon,
>>>
>>> Correct.
>>>
>>> Which NFD and ndn-cxx versions are associated with 2.1 and 2.2 ?
>>>
>>> Thanks,
>>> C
>>>
>>> On Wed, Sep 20, 2017 at 8:34 PM, Spyridon (Spyros) Mastorakis <
>>> mastorakis at cs.ucla.edu> wrote:
>>>
>>>> NFD and ndn-cxx are linked as github submodules with the simulator.
>>>>
>>>> Unless you use git clone with the —recursive flag on, you will download
>>>> the ndnSIM source code that contains 2 empty directories named NFD and
>>>> ndn-cxx.
>>>>
>>>> Spyridon (Spyros) Mastorakis
>>>> Personal Website: http://cs.ucla.edu/~mastorakis/
>>>> Internet Research Laboratory
>>>> Computer Science Department
>>>> UCLA
>>>>
>>>> On Sep 20, 2017, at 11:31 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>
>>>> Hi all,
>>>>
>>>> @John: I am on ubuntu 14.04.
>>>>
>>>> @Spyridon: When I use the following link to download 2.1, how could I
>>>> download the wrong NFD and ndn-cxx versions associated with this
>>>> simulator ?
>>>>
>>>> https://github.com/named-data-ndnSIM/ndnSIM/releases/tag/ndnSIM-2.1
>>>>
>>>> Thanks,
>>>> C
>>>>
>>>> On Wed, Sep 20, 2017 at 8:26 PM, Spyridon (Spyros) Mastorakis <
>>>> mastorakis at cs.ucla.edu> wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> are you sure you download the appropriate NFD and ndn-cxx versions
>>>>> associated with the simulator too?
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Spyridon (Spyros) Mastorakis
>>>>> Personal Website: http://cs.ucla.edu/~mastorakis/
>>>>> Internet Research Laboratory
>>>>> Computer Science Department
>>>>> UCLA
>>>>>
>>>>> On Sep 20, 2017, at 11:18 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>>
>>>>> Hi everyone,
>>>>>
>>>>> I need to install ndnSIM 2.1.I downloaded ndnSIM 2.1 from here:
>>>>>
>>>>> https://github.com/named-data-ndnSIM/ndnSIM/releases/tag/ndnSIM-2.1
>>>>>
>>>>> As for "ns-3" and "pybindgen", first, I did the following:
>>>>>
>>>>> git clone https://github.com/named-data-ndnSIM/ns-3-dev.git ns-3
>>>>> git clone https://github.com/named-data-ndnSIM/pybindgen.git pybindgen
>>>>>
>>>>>
>>>>> After, I tried also downloading older versions of "pybindgen" as well as "ns-3". But in any case, when I write "./waf configure --enable-examples", I have the following error:
>>>>>
>>>>>
>>>>> Traceback (most recent call last):
>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Scripting.py", line 108, in waf_entry_point
>>>>>     run_commands()
>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Scripting.py", line 165, in run_commands
>>>>>     parse_options()
>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Scripting.py", line 138, in parse_options
>>>>>     Context.create_context('options').execute()
>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Options.py", line 146, in execute
>>>>>     super(OptionsContext,self).execute()
>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 92, in execute
>>>>>     self.recurse([os.path.dirname(g_module.root_path)])
>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 133, in recurse
>>>>>     user_function(self)
>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/wscript", line 213, in options
>>>>>     opt.recurse('src')
>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 133, in recurse
>>>>>     user_function(self)
>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/src/wscript", line 48, in options
>>>>>     opt.recurse(module, mandatory=False)
>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 133, in recurse
>>>>>     user_function(self)
>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/src/ndnSIM/wscript", line 16, in options
>>>>>     opt.load(['version'], tooldir=['%s/.waf-tools' % opt.path.abspath()])
>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 86, in load
>>>>>     module=load_tool(t,path)
>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 342, in load_tool
>>>>>     __import__(tool)
>>>>> ImportError: No module named version
>>>>>
>>>>>
>>>>> I have the same problem for installing ndnSIM 2.2 as well. That is, I can only install the latest version. Does anybody have a successful experience on installing 2.1 or 2.2 ? I highly appreciate any guidance.
>>>>>
>>>>>
>>>>> Thanks,
>>>>>
>>>>> C
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.lists.cs.ucla.edu/pipermail/ndnsim/attachments/20170920/770d2817/attachment.html>

More information about the ndnSIM mailing list