[Mini-NDN] Result of a hyperbolic topology on minindn

[Imen Souidene]

 Thanks you for help.
How can I calculate the overhead from dump file of mini-ndn and the same for the RTT ?

S.Imen    On Wednesday, April 4, 2018, 5:25:19 PM GMT+1, Ashlesh Gawande (agawande) <agawande at memphis.edu> wrote:  
 
 #yiv1457710626 #yiv1457710626 -- P {margin-top:0;margin-bottom:0;}#yiv1457710626 
Don't modify the topology with hyperbolic state, use:

--routing hr

(see minindn --help)





Ashlesh

From: Imen Souidene <imensouidene2009 at yahoo.com>
Sent: Wednesday, April 4, 2018 11:06:05 AM
To: mini-ndn at lists.cs.ucla.edu; Ashlesh Gawande (agawande)
Subject: Re: [Mini-NDN] Result of a hyperbolic topology on minindn 
I used two topologies:
1- the first:   NLSR has successfully converged.
[nodes]mdms: _ radius=0.0 angle=5.71428572428571dms: _ radius=0.0 angle=5.71428572428571sub1: _ radius=0.0 angle=2.57142858142857tr1: _ radius=0.0 angle=2.60221362397685sm11: _ radius=0.0 angle=2.57142858142857sm12: _ radius=0.0 angle=5.71428572428571sm13: _ radius=0.0 angle=2.57142858142857sm14: _ radius=0.0 angle=5.71428572428571sm15: _ radius=0.0 angle=2.57142858142857sm16: _ radius=0.0 angle=5.71428572428571sm17: _ radius=0.0 angle=2.57142858142857sm18: _ radius=0.0 angle=5.71428572428571sm19: _ radius=0.0 angle=2.57142858142857sm110: _ radius=0.0 angle=5.71428572428571[links]mdms:sub1 delay=1ms dms:sub1 delay=1mssub1:tr1 delay=10mstr1:sm11 delay=100ms tr1:sm12 delay=100mstr1:sm13 delay=100mstr1:sm14 delay=100mstr1:sm15 delay=100mstr1:sm16 delay=100mstr1:sm17 delay=100mstr1:sm18 delay=100mstr1:sm19 delay=100mstr1:sm110 delay=100m
2-The second: 
[nodes]mdms: _ hyperbolic-state=on radius=0.0 angle=5.71428572428571dms: _ hyperbolic-state=on radius=0.0 angle=5.71428572428571sub1: _ hyperbolic-state=on radius=0.0 angle=2.57142858142857tr1: _ hyperbolic-state=on radius=0.0 angle=2.60221362397685sm11: _ hyperbolic-state=on radius=0.0 angle=2.57142858142857sm12: _ hyperbolic-state=on radius=0.0 angle=5.71428572428571sm13: _ hyperbolic-state=on radius=0.0 angle=2.57142858142857sm14: _ hyperbolic-state=on radius=0.0 angle=5.71428572428571sm15: _ hyperbolic-state=on radius=0.0 angle=2.57142858142857sm16: _ hyperbolic-state=on radius=0.0 angle=5.71428572428571sm17: _ hyperbolic-state=on radius=0.0 angle=2.57142858142857sm18: _ hyperbolic-state=on radius=0.0 angle=5.71428572428571sm19: _ hyperbolic-state=on radius=0.0 angle=2.57142858142857sm110: _ hyperbolic-state=on radius=0.0 angle=5.71428572428571[links]mdms:sub1 delay=1ms dms:sub1 delay=1mssub1:tr1 delay=10mstr1:sm11 delay=100ms tr1:sm12 delay=100mstr1:sm13 delay=100mstr1:sm14 delay=100mstr1:sm15 delay=100mstr1:sm16 delay=100mstr1:sm17 delay=100mstr1:sm18 delay=100mstr1:sm19 delay=100mstr1:sm110 delay=100ms

On Wednesday, April 4, 2018, 4:56:04 PM GMT+1, Ashlesh Gawande (agawande) <agawande at memphis.edu> wrote:

#yiv1457710626 #yiv1457710626 --#yiv1457710626x_yiv7222823295 #yiv1457710626x_yiv7222823295 -- p {margin-top:0;margin-bottom:0;}#yiv1457710626 
How did you come up with those coordinates? NLSR may not converge if those are not correct - check the distances being calculated.

Convergence means all prefixes (router and advertised) are propagated. You can manually check which aren't propagated and also check the nlsr.log for any errors.





Ashlesh

From: Mini-NDN <mini-ndn-bounces at lists.cs.ucla.edu> on behalf of Imen Souidene <imensouidene2009 at yahoo.com>
Sent: Wednesday, April 4, 2018 8:31:50 AM
To: mini-ndn at lists.cs.ucla.edu
Subject: [Mini-NDN] Result of a hyperbolic topology on minindn Dear committee; 
I used a simple topology and I do'nt find a problem at the compilation level but when I modified it with " _ hyperbolic-state=on " in each node : NLSR has not converged. Exiting...
The topology file :[nodes]mdms: _ hyperbolic-state=on radius=0.0 angle=5.71428572428571dms: _ hyperbolic-state=on radius=0.0 angle=5.71428572428571sub1: _ radius=0.0 angle=2.57142858142857tr1: _ radius=0.0 angle=2.60221362397685sm11: _ radius=0.0 angle=2.57142858142857
[links]mdms:sub1 delay=1ms dms:sub1 delay=1mssub1:tr1 delay=10mstr1:sm11 delay=100ms 

How can I solve it?


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.lists.cs.ucla.edu/pipermail/mini-ndn/attachments/20180405/8cf172d2/attachment.html>