<div dir="ltr"><div><div>Hi,<br><br></div>I am testing a scenario of NLSR simulation and hitting an exception in ndnSIM. I searched for the error in the past learned that I need to start the NFD and NRD processes, but that suggestion was in case of real applications. What is the cause of this in the simulation setup? <br><br></div><div>Am I missing any environment setup, which is leading to this error? <br></div><div><br>4.227s ndn-cxx.Face:expressInterest(): >> Interest: /ndn/NLSR/sync/00<br>4.227s ndn-cxx.Face:expressInterest(): >> Interest: /ndn/NLSR/sync/00<br>4.227s ndn-cxx.Face:expressInterest(): >> Interest: /ndn/NLSR/sync/00<br>8.487s ndn-cxx.Face:expressInterest(): >> Interest: /ndn/NLSR/sync/00<br>8.487s ndn-cxx.Face:expressInterest(): >> Interest: /ndn/NLSR/sync/00<br>8.487s ndn-cxx.Face:expressInterest(): >> Interest: /ndn/NLSR/sync/00<br>10s HelloProtocol:scheduleInterest(): Scheduling HELLO Interests in 5 seconds<br>10s HelloProtocol:scheduleInterest(): Scheduling HELLO Interests in 5 seconds<br>10s HelloProtocol:scheduleInterest(): Scheduling HELLO Interests in 5 seconds<br>ERROR: Failed to register prefix in local hub's daemon<br>terminate called after throwing an instance of 'nlsr::Nlsr::Error'<br>  what():  Error: Prefix registration failed<br><br>Program received signal SIGABRT, Aborted.<br>0x00007fffe99cccc9 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56<br>56    ../nptl/sysdeps/unix/sysv/linux/raise.c: No such file or directory.<br><br></div>/anil.<br><br></div>