<div dir="ltr"><div>First of all please receive my greetings. <br><br>I post some doubts in this opportunity regarding to the integration of ndn with LTE. <br><br>1. When I enable the ndn feature in 
the script and I configure the remoteHost (sort of Internet) as a "producer" and some 
enbNodes (base stations) as a "consumer" the ndn packets can be visualized without any 
problem but what it is important to analyse is the ndn traffic among 
ueNodes and here the problem because as soon as I set a ueNode as a 
consumer or producer, then the ndn traffic cannot be visualized. What 
could be the possible cause of this? <br><br>When I set in the 
simulation the remoteHost as a producer and one enbNode as a consumer 
and changed the data payload length to 5000 it immediately showed me a 
segmentation alarm when I ran ./waf due to the MTU maximum length 
(1500B) but when I tried the same configuration with the ueNodes any 
alarm was shown. Do the ueNodes have a different behaviour or 
configuration that should be taken into account to run a simulation like
 this? <br><br></div>The other thing is that I see the PIT table during the simulating and it can be seen that it is erased after issuing an ndn interest, letting me suppose that probably it received a data message using the reverse path and that's why the entry get erased but I am not sure though. <br><div><br>Thanks for the hints that could be provided to solve this issue. <br><br>Regards. </div></div>