<div dir="ltr"><div><div>Hi Spyridon,<br><br></div>Thanks for your answer. I will try to dig a bit more about this issue.<br><br></div>Regards. <br></div><div class="gmail_extra"><br><div class="gmail_quote">On Thu, Jul 2, 2015 at 8:59 PM, Spyridon (Spyros) Mastorakis <span dir="ltr"><<a href="mailto:spiros.mastorakis@gmail.com" target="_blank">spiros.mastorakis@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi Gustavo,<br>
<br>
I think that this has to do with the wireless medium itself. Specifically, the nature of the wireless transmission.<br>
<span class=""><br>
--<br>
Spyridon (Spyros) Mastorakis<br>
Personal Website: <a href="http://cs.ucla.edu/~mastorakis/" rel="noreferrer" target="_blank">http://cs.ucla.edu/~mastorakis/</a><br>
Internet Research Laboratory<br>
PhD Computer Science<br>
UCLA<br>
<br>
<br>
<br>
<br>
</span><div><div class="h5">> On Jun 29, 2015, at 1:43 PM, Gustavo Gonzalez <<a href="mailto:gonzalezcga@gmail.com">gonzalezcga@gmail.com</a>> wrote:<br>
><br>
> Hello Spyridon,<br>
><br>
> Regarding to the problem I was facing to check the traffic in the nodes it is partially solved. I recheck the commands used to enable Ascii scripts and now it works in that way but still failing in the python interface when you want to check directly on the node during the running simulation.<br>
><br>
> I want to ask you the following. I have added the two wireless devices in infrastructure mode. One of them is a consumer and a wired node is the publisher. My question is why if I don't establish a connection between the two wireless nodes one of them sends interest to the other one? Default routes are enables but even when I used a customized forwarding strategy that still happens. Is that a normal behaviour?<br>
><br>
> In the attachment you can find the file.<br>
><br>
> Regards.<br>
><br>
> On Fri, Jun 26, 2015 at 5:30 PM, Gustavo Gonzalez <<a href="mailto:gonzalezcga@gmail.com">gonzalezcga@gmail.com</a>> wrote:<br>
> Hello Spyridon,<br>
><br>
> I use first the visualizer and the simulation ran without any problem but when I check each node the simulation stopped. Then I used the ASCII command and CS and L3 tracers to check what was travelling through the node but then the simulation crashed again.<br>
><br>
> Also, if a run the entire topology based on P2P links I don't have any problem. It is just when P2P and WiFi are present in the same simulation running ndn.<br>
><br>
> I appreciate the hints you could give me to solve it.<br>
><br>
> Regards.<br>
><br>
> Le 26 juin 2015 16:16, "Spyridon (Spyros) Mastorakis" <<a href="mailto:spiros.mastorakis@gmail.com">spiros.mastorakis@gmail.com</a>> a écrit :<br>
> Hi Gustavo,<br>
><br>
> to assist you in the best possible way, I would like to know whether you use the visualizer or the command line logs. Moreover, when you said that you print the trace of a certain node, I guess you use our tracers, right?<br>
><br>
> Thank you.<br>
><br>
> --<br>
> Spyridon (Spyros) Mastorakis<br>
> Personal Website: <a href="http://cs.ucla.edu/~mastorakis/" rel="noreferrer" target="_blank">http://cs.ucla.edu/~mastorakis/</a><br>
> Internet Research Laboratory<br>
> PhD Computer Science<br>
> UCLA<br>
><br>
><br>
><br>
><br>
> > On Jun 26, 2015, at 3:34 PM, Gustavo Gonzalez <<a href="mailto:gonzalezcga@gmail.com">gonzalezcga@gmail.com</a>> wrote:<br>
> ><br>
> > Hello,<br>
> ><br>
> > I have been facing this problem. I have defined the wireless parameters to define an access point. When I check the interest and data messages in the wireless network everything is fine.<br>
> ><br>
> > When I include and connect to the Access Point a wired device through point to point link the data and interest messages keep going in the network but if I want to check the traffic that is flowing in each one of the nodes where the interest and data messages travel, then the simulation stops.<br>
> ><br>
> > I have also done only telling to the simulator to save the trace of a certain node in a file but then the simulation stops again.<br>
> ><br>
> > I suspect that due to a redifinition of the network characteristics of the node when I set the NetDeviceContainer in which I include the access point and the wired node  is probably the cause of the problem but I am not sure.<br>
> ><br>
> > Please could you provide some hints to solve the issue. I have also run the debugger (gdb tool) and it exits normally without precising any error.<br>
> ><br>
> > Thanks for your support.<br>
><br>
><br>
</div></div>> <sim01_problem.cc><br>
<br>
</blockquote></div><br></div>