[ndnSIM] Problem in installing ndnSIM 2.1 / 2.2

[Carl Zu]

Dear Spyridon,

Could you please give me some more hints?

Thanks,
C

On Wed, Sep 20, 2017 at 9:07 PM, Carl Zu <carlzu8 at gmail.com> wrote:

> Hi Spyridon,
>
> Thanks for the link. I read it carefully. However, I still have a couple
> of questions below:
>
> 1. is the cryptoPP version(s) associated with ndnSIM's 2.1, 2.2, and 2.3
> different ?. If this is the case, one cannot have different versions of
> ndnSIM installed on a single machine. Right?
>
> 2. I could not find any information regarding the appropriate versions of
> cryptoPP for each of 2.1, 2.2, and 2.3 releases.
>
> Thank you for your guidance in advance.
>
> -C
>
> On Wed, Sep 20, 2017 at 8:51 PM, Spyridon (Spyros) Mastorakis <
> mastorakis at cs.ucla.edu> wrote:
>
>> Probably you are using a different version of CryptoPP that the one
>> expected.
>>
>> Please take a look here:
>>
>> https://github.com/named-data-ndnSIM/ndnSIM/issues/81#issuec
>> omment-328081673
>>
>> Spyridon (Spyros) Mastorakis
>> Personal Website: http://cs.ucla.edu/~mastorakis/
>> Internet Research Laboratory
>> Computer Science Department
>> UCLA
>>
>> On Sep 20, 2017, at 11:49 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>
>> Thank you Spyridon.
>>
>> Yes, just figured out that for ndnSIM 2.1, I need to download version
>> 0.3.4 for NFD and ndn-cxx. Now, it configures, but it says:
>>
>> CryptoPP is present, but is not usable
>> (complete log in /home/carl/ndnSIM-2.1/ns-3/build/config.log)
>>
>> I have installed all the prerequisites completely. What could be wrong
>> here.
>>
>> Thanks,
>> C
>>
>>
>>
>> On Wed, Sep 20, 2017 at 8:43 PM, Spyridon (Spyros) Mastorakis <
>> mastorakis at cs.ucla.edu> wrote:
>>
>>> Take a look at the release notes of each version. The NFD and ndn-cxx
>>> versions are mentioned there.
>>>
>>> Then, follow those links and clone the branches with the appropriate
>>> version:
>>>
>>> https://github.com/named-data-ndnSIM/ndn-cxx
>>> https://github.com/named-data-ndnSIM/NFD
>>>
>>> Thanks,
>>>
>>> Spyridon (Spyros) Mastorakis
>>> Personal Website: http://cs.ucla.edu/~mastorakis/
>>> Internet Research Laboratory
>>> Computer Science Department
>>> UCLA
>>>
>>> On Sep 20, 2017, at 11:39 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>
>>> Hi Spyridon,
>>>
>>> Correct.
>>>
>>> Which NFD and ndn-cxx versions are associated with 2.1 and 2.2 ? Could
>>> you please give me instructions how can I do this with clone and with
>>> recursive flag ?
>>>
>>> Thanks,
>>> C
>>>
>>> On Wed, Sep 20, 2017 at 8:37 PM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>
>>>> Hi Spyridon,
>>>>
>>>> Correct.
>>>>
>>>> Which NFD and ndn-cxx versions are associated with 2.1 and 2.2 ?
>>>>
>>>> Thanks,
>>>> C
>>>>
>>>> On Wed, Sep 20, 2017 at 8:34 PM, Spyridon (Spyros) Mastorakis <
>>>> mastorakis at cs.ucla.edu> wrote:
>>>>
>>>>> NFD and ndn-cxx are linked as github submodules with the simulator.
>>>>>
>>>>> Unless you use git clone with the —recursive flag on, you will
>>>>> download the ndnSIM source code that contains 2 empty directories named NFD
>>>>> and ndn-cxx.
>>>>>
>>>>> Spyridon (Spyros) Mastorakis
>>>>> Personal Website: http://cs.ucla.edu/~mastorakis/
>>>>> Internet Research Laboratory
>>>>> Computer Science Department
>>>>> UCLA
>>>>>
>>>>> On Sep 20, 2017, at 11:31 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>>
>>>>> Hi all,
>>>>>
>>>>> @John: I am on ubuntu 14.04.
>>>>>
>>>>> @Spyridon: When I use the following link to download 2.1, how could I
>>>>> download the wrong NFD and ndn-cxx versions associated with this
>>>>> simulator ?
>>>>>
>>>>> https://github.com/named-data-ndnSIM/ndnSIM/releases/tag/ndnSIM-2.1
>>>>>
>>>>> Thanks,
>>>>> C
>>>>>
>>>>> On Wed, Sep 20, 2017 at 8:26 PM, Spyridon (Spyros) Mastorakis <
>>>>> mastorakis at cs.ucla.edu> wrote:
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> are you sure you download the appropriate NFD and ndn-cxx versions
>>>>>> associated with the simulator too?
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Spyridon (Spyros) Mastorakis
>>>>>> Personal Website: http://cs.ucla.edu/~mastorakis/
>>>>>> Internet Research Laboratory
>>>>>> Computer Science Department
>>>>>> UCLA
>>>>>>
>>>>>> On Sep 20, 2017, at 11:18 AM, Carl Zu <carlzu8 at gmail.com> wrote:
>>>>>>
>>>>>> Hi everyone,
>>>>>>
>>>>>> I need to install ndnSIM 2.1.I downloaded ndnSIM 2.1 from here:
>>>>>>
>>>>>> https://github.com/named-data-ndnSIM/ndnSIM/releases/tag/ndnSIM-2.1
>>>>>>
>>>>>> As for "ns-3" and "pybindgen", first, I did the following:
>>>>>>
>>>>>> git clone https://github.com/named-data-ndnSIM/ns-3-dev.git ns-3
>>>>>> git clone https://github.com/named-data-ndnSIM/pybindgen.git pybindgen
>>>>>>
>>>>>>
>>>>>> After, I tried also downloading older versions of "pybindgen" as well as "ns-3". But in any case, when I write "./waf configure --enable-examples", I have the following error:
>>>>>>
>>>>>>
>>>>>> Traceback (most recent call last):
>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Scripting.py", line 108, in waf_entry_point
>>>>>>     run_commands()
>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Scripting.py", line 165, in run_commands
>>>>>>     parse_options()
>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Scripting.py", line 138, in parse_options
>>>>>>     Context.create_context('options').execute()
>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Options.py", line 146, in execute
>>>>>>     super(OptionsContext,self).execute()
>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 92, in execute
>>>>>>     self.recurse([os.path.dirname(g_module.root_path)])
>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 133, in recurse
>>>>>>     user_function(self)
>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/wscript", line 213, in options
>>>>>>     opt.recurse('src')
>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 133, in recurse
>>>>>>     user_function(self)
>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/src/wscript", line 48, in options
>>>>>>     opt.recurse(module, mandatory=False)
>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 133, in recurse
>>>>>>     user_function(self)
>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/src/ndnSIM/wscript", line 16, in options
>>>>>>     opt.load(['version'], tooldir=['%s/.waf-tools' % opt.path.abspath()])
>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 86, in load
>>>>>>     module=load_tool(t,path)
>>>>>>   File "/home/carl/ndnSIM-2.1/ns-3/.waf-1.8.12-f00e5b53f6bbeab1384a38c9cc5d51f7/waflib/Context.py", line 342, in load_tool
>>>>>>     __import__(tool)
>>>>>> ImportError: No module named version
>>>>>>
>>>>>>
>>>>>> I have the same problem for installing ndnSIM 2.2 as well. That is, I can only install the latest version. Does anybody have a successful experience on installing 2.1 or 2.2 ? I highly appreciate any guidance.
>>>>>>
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> C
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.lists.cs.ucla.edu/pipermail/ndnsim/attachments/20170920/cc3270a2/attachment-0001.html>