[Mini-NDN] Face register failed

[Otávio Augusto]

Hello everybody. I'm starting to emulate an NDN-based proposal in the
mini-NDN. I'm using an ubuntu 20.04 virtual machine and I installed the
mini-NDN using the "install.sh" file. However, when trying to run the
mnndn.py example I get the following error:

Using topology file /usr/local/etc/mini-ndn/default-topology.conf
> *** Creating network
> *** Adding controller
> *** Adding hosts:
> a b c d
> *** Adding switches:


*** Adding links:
> (10ms delay) (10ms delay) (a, b) (10ms delay) (10ms delay) (a, c) (10ms
> delay) (10ms delay) (b, d)
> *** Configuring hosts
> a b c d
> *** Starting controller
> c0
> *** Starting 0 switches


Starting NFD on nodes
> Starting NLSR on nodes
> [d] Face register failed: face-updated id=260 local=udp4://10.0.0.10:6363
> remote=udp4://10.0.0.9:6363 persistency=permanent reliability=off
> congestion-marking=on congestion-marking-interval=100ms
> default-congestion-threshold=65536B mtu=8800
> *** Starting CLI:


I tested this same process through vagrant and it worked well, however, I
would like to start using it through my virtual machine due to the
graphical interface.

Thank you very much in advance.

--
Otávio da Cruz
M.Sc. student
Electrical Engineering at the Graduate Program in Electrical Engineering of
the Federal University of Rio Grande do Sul (UFRGS)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.lists.cs.ucla.edu/pipermail/mini-ndn/attachments/20230503/0d918124/attachment.html>