[Mini-NDN] Connect mini-ndn nodes to an outside network
Matteo Bertolino
Matteo.Bertolino at eurecom.fr
Fri Nov 18 01:21:53 PST 2016
Dear Ashlesh,
No Errors at the beginning of MiniNDN, and no errors in general.
However, doing "switch off and reboot" I've some improvements. The
root-eth0 is present just running ifconfig in the machine. Is it enough?
My output are:
1) MININDN
mininet> a ifconfig
a-eth0 Link encap:Ethernet HWaddr 12:b7:c7:b0:99:c7
inet addr:1.0.0.1 Bcast:1.0.0.3 Mask:255.255.255.252
inet6 addr: fe80::10b7:c7ff:feb0:99c7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13 errors:0 dropped:0 overruns:0 frame:0
TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1404 (1.4 KB) TX bytes:1404 (1.4 KB)
a-eth1 Link encap:Ethernet HWaddr fe:2c:28:35:26:dc
inet addr:1.0.0.5 Bcast:1.0.0.7 Mask:255.255.255.252
inet6 addr: fe80::fc2c:28ff:fe35:26dc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13 errors:0 dropped:0 overruns:0 frame:0
TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1404 (1.4 KB) TX bytes:1404 (1.4 KB)
a-eth2 Link encap:Ethernet HWaddr 26:8e:b9:9a:ec:8a
inet addr:1.0.0.10 Bcast:1.0.0.11 Mask:255.255.255.252
inet6 addr: fe80::248e:b9ff:fe9a:ec8a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:851 (851.0 B) TX bytes:931 (931.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
------------------------------------------------------------------
------------------------------------------------------------------
2) IN THE MACHINE
ndn at ndn:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:16:35:af:94:4b
inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0
inet6 addr: fe80::216:35ff:feaf:944b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:25315 errors:0 dropped:0 overruns:0 frame:0
TX packets:13892 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9648263 (9.6 MB) TX bytes:1989463 (1.9 MB)
eth1 Link encap:Ethernet HWaddr 52:54:00:12:34:56
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::5054:ff:fe12:3456/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5365 errors:0 dropped:0 overruns:0 frame:0
TX packets:5399 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:769454 (769.4 KB) TX bytes:781753 (781.7 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:23 errors:0 dropped:0 overruns:0 frame:0
TX packets:23 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:2278 (2.2 KB) TX bytes:2278 (2.2 KB)
root-eth0 Link encap:Ethernet HWaddr b2:6e:70:b5:4d:60
inet addr:1.0.0.9 Bcast:1.0.0.11 Mask:255.255.255.252
inet6 addr: fe80::b06e:70ff:feb5:4d60/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1190 (1.1 KB) TX bytes:1138 (1.1 KB)
Bests,
Matteo
Quoting "Ashlesh Gawande (agawande)" <agawande at memphis.edu>:
> Are there any errors when Mini-NDN starts?
>
>
> What is the output of "a ifconfig" in Mini-NDN?
>
>
> And the output of ifconfig on the machine (not in Mini-NDN)?
>
>
> Ashlesh
>
> ________________________________
> From: Mini-NDN <mini-ndn-bounces at lists.cs.ucla.edu> on behalf of
> Matteo Bertolino <Matteo.Bertolino at eurecom.fr>
> Sent: Thursday, November 17, 2016 11:47:54 AM
> To: mini-ndn at lists.cs.ucla.edu
> Subject: [Mini-NDN] Connect mini-ndn nodes to an outside network
>
> Hello,
> I followed this doc:
> https://github.com/named-data/mini-ndn/blob/master/docs/CONNECT-TO-OUTSIDE.md
>
> Unfortunately, at this point:
>
> "Run Mini-NDN with the simple topology and issue ifconfig on the local
> machine to confirm the addition of the interface. You should be able
> to locate "root-eth0" "
>
> I am not able to see the node root neither root-eth0.
>
> Do you manage to run this scenario?
> Thanks,
> Matteo
>
> -------------------------------------------------------------------------------
> This message was sent using EURECOM Webmail: http://webmail.eurecom.fr
>
> _______________________________________________
> Mini-NDN mailing list
> Mini-NDN at lists.cs.ucla.edu
> http://www.lists.cs.ucla.edu/mailman/listinfo/mini-ndn
>
-------------------------------------------------------------------------------
This message was sent using EURECOM Webmail: http://webmail.eurecom.fr
More information about the Mini-NDN
mailing list