[Mini-NDN] Fwd: nemune mail

[sepehr abdous]

Thank you very much for your help

On Tue, Nov 8, 2016 at 7:40 PM, Ashlesh Gawande (agawande) <
agawande at memphis.edu> wrote:

> The problem with that file is it should be:
>
> general
>
> {
>
>
> and not general{
>
> The curly should be on a new line.
>
>
> For the neighbor section, the face-uri is the IP of the neighbor.
>
>
> Ashlesh
> ------------------------------
> *From:* Mini-NDN <mini-ndn-bounces at lists.cs.ucla.edu> on behalf of sepehr
> abdous <sepehrabdous1375 at gmail.com>
> *Sent:* Tuesday, November 8, 2016 8:56:16 AM
> *To:* mini-ndn at lists.cs.ucla.edu
> *Subject:* [Mini-NDN] Fwd: nemune mail
>
> Hello all,
> I'm new to nlsr and I'm trying to configure the following network
> topology, means I want to produce a nlsr.conf for these nodes:
>
> [image: Inline image 1]
> I'm learning from the nlsr.conf file in mini-ndn nodes(like 'a' node), but
> when I do I get the following error using the following command while I
> don't encounter this error for the 'a' node:
>
> the command is:
>
> # nlsr -f /home/sepehr/Desktop/projectcheck/node1/nlsr.conf
>
> and the error is:
>
> Failed to parse configuration file
> /home/sepehr/Desktop/projectcheck/node1/nlsr.conf
> Error in configuration file processing! Exiting from NLSR
>
> also my configuration for node1 is :
>
> general{
>   network /ndn/
>   site /edu
>   router /%C1.Router/cs/node1
>   log-level DEBUG
>   log-dir /home/sepehr/Desktop/projectcheck//node1/log
>   seq-dir /home/sepehr/Desktop/projectcheck//node1/log
>   lsa-refresh-time 1800 ;30 minutes
> }
>
> neighbors
> {
>     neighbor
>     {
>           name /ndn/edu/%C1.Router/cs/node2
>           face-uri udp://1.0.0.2        ;not so sure about it
>           link-cost 10
>     }
>     neighbor
>     {
>           name /ndn/edu/%C1.Router/cs/node3
>           face-uri udp://1.0.0.3        ;not so sure about it
>           link-cost 10
>     }
> }
>
> hyperbolic
> {
>     state off
>     radius 0.0
>     angle 0.0
> }
>
> fib
> {
>     max-faces-per-prefix 3
> }
>
> advertising
> {
>     prefix /ndn/edu/node1
> }
>
>
> security
> {
>   validator
>   {
>     trust-anchor
>     {
>       type any
>     }
>   }
>   prefix-update-validator
>   {
>     trust-anchor
>     {
>       type any
>     }
>   }
> }
>
> which is like 'a' node in mini-ndn.
> nodes 2 to 6's configuration is similar.
>
> I'm not sure with the lines like
> face-uri udp://1.0.0.2
> in neighbor sections? how can I understand how to specify this numbers for
> my nodes?
>
> so can anyone please help me with my problem?
>
> Thank you
>



-- 
Sepehr Abdous
Faculty: abdous at ce.sharif.edu
Yahoo mail: sepehrabdous at yahoo.com
Cellphone:+989194030591
School of computer engineering
Sharif University of Technology
Tehran, Iran
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.lists.cs.ucla.edu/pipermail/mini-ndn/attachments/20161108/35cf5ad6/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot from 2016-11-08 03-29-33.png
Type: image/png
Size: 9131 bytes
Desc: not available
URL: <http://www.lists.cs.ucla.edu/pipermail/mini-ndn/attachments/20161108/35cf5ad6/attachment.png>